+1 (844) 430-0510
USD0.00

GRABO Plaques d’installation d’armoire par Izzy Swan (lot de 2)

(3 avis client)

USD149.99

UGS : 480 Catégorie :
Free Shipping. Fullfilled by GRABO dealers near you

USD149.99

It seems like you're attempting to make a wholesale order. Please register to view our wholesale / dealer shop for better pricing, Join as a Wholesaler.

Description

Les plaques d’installation d’armoires Grabo d’Izzy Swan sont là pour vous offrir une solution sûre et facile pour accrocher et installer des armoires tout seul ! Les plaques d’installation d’armoires se fixent à n’importe quel outil Grabo en utilisant les points d’ancrage en métal sur la plaque de base de l’outil Grabo. Les plaques sont vissées à l’aide des deux boulons fournis avec les plaques. Ces plaques vous permettent d’utiliser une surface plane, stable et horizontale sur laquelle vous pouvez poser des objets lourds. Vous n’avez donc plus à tenir votre armoire ou votre étagère pendant que vous la mettez à niveau et que vous percez vos vis dans le mur. Arrêtez de vous battre et suspendez vos armoires de manière simple, tout seul ! Cet ensemble comprend deux (2) plaques.

 

Informations complémentaires

Poids 3.6 livres
Dimensions 13 × 9.5 × 4 pouce

3 avis pour GRABO Plaques d’installation d’armoire par Izzy Swan (lot de 2)

  1. Français

    Bill Sexton

    Izzy did it again. Finally a smart way to hang cabinets.

  2. Français

    Ralph Carlson

    Changed our business forever, I don’t need to send two guys to install cabinets anymore, one guy can do it easily.

  3. Français

    Walter Provost

    So simple, these cabinet plates are genius and are real MVP on the job site.

Seuls les clients connectés ayant acheté ce produit ont la possibilité de laisser un avis.

GRABO est obsédé par la qualité.
Contrairement à de nombreuses marques d'outils électriques, nous ne choisissons pas d'utiliser la fabrication OEM de tiers. Nous avons notre propre usine GRABO entièrement détenue et gérée. Cela nous permet d'offrir à nos clients la meilleure valeur pour leur argent et de maintenir les normes de qualité les plus élevées. 

Oui, nous sommes présents sur les réseaux sociaux ! Connectez-vous avec nous sur votre plateforme préférée pour rester à jour avec les nouveaux lancements de produits, les cadeaux, les astuces et les informations générales sur les outils Grabo ! 

QUE PENSENT LES AUTRES DE GRABO

Il est important pour nous de vous fournir des avis honnêtes et vérifiés provenant de professionnels réels. Cliquez sur l'avis pour voir sa source et lire d'autres témoignages vérifiés provenant d'Amazon, de groupes professionnels Facebook et d'autres sources.

  1. Français

    A. Dioguardi

    What do you get?
    A battery operated vacuum suction cup with carrying case.

    How does it work?
    Release the battery compartment, slide out the battery holder, install four AA batteries. Slide the holder back in and you’re ready to go.
    Push the suction cup against a flat surface, press the green button and you’ll hear the vacuum pump start. There’s a suction guage that SHOULD start to move when the pump starts. IF it doesn’t, the cup is not properly sealed against the surface. Once the guage reaches the green “zone” and maintains it for 3 seconds the pump will automatically turn off. If the tool begins to lose it’s suction the pump will turn back on and attempt to restore the vacuum into the green zone.
    Once you’re done. Simply push the green button a second time to turn off power to the pump. If you hit the vacuum release collar before you do this the pump will kick on and try to restore the vacuum. Not a huge deal, just push the button. But why make the pump work any longer than it has to.
    You’ll notice that there are multiple filter holes in the suction cup, most of these tools only have one. I’m going to assume one goes to vacuum guage and one goes to a vacuum sensor. Just a guess. In the manual there are rudimentaty instructions on how to change the white vacuum filter. Basically “remove fitler with the tip of a screw driver. Then push the replacement filter into the bottom plate and secure it” One of those “it sounds simple enough until you have to do it” instructions
    It somes with a nice cushioned carrying case to ptotect it. But doesn;t come with batteries. I took batteries that worked in my TV remotes, but they must have been close to depleted because the pump sounded like it was laboring. Put four fresh batteries in and it worked like a champ. So if you use this a lot you might want to invest in some rechargeable batteries.. The manual also suggests you remove the batteries when not in use.
    It’ll grip glass, drywall, tile etc ANYTHING WITH A SMOOTH surface. You might dream about going all Mission Impossible with these and start climbing buidings. Obviously I’m not the first one to think that, since there’s a very specific warning in the manual about NOT doing so. (I still think it would be cool) Under IDEAL LAB CONDITIONS it’s rated at 440lbs. Under WORKING CONDITIONS it’s rated at half that or 220lbs. So I hope you’re not too heavy.
    The benefit of this tool over others. NO pumping, there a guage to let you know the vacuum is holding and it automatically restores the vacuum should it begin to fail.
    The ultimate question: Is it a good value at $150? If you just need it occasionally perhaps a PAIR of another brand for $60 will work for you. If you need this for your livelihood, it might be worth it. I’ll leave that up to you to decide.

    Review source: Amazon

  2. Français

    mike dyminski

    We used these for 1/2″ plate steel counter top installation. Good investment.

    Review source: Amazon

  3. Français

    Michael B.

    Love the Sleek Design!

  4. Français

    Ron Landa

    I’m a professional contractor and this canvas bag is perfect for carrying my tools. The double zipper closure keeps everything secure and the durable canvas material can withstand heavy use.

Voir tous les avis

ACHETER CHEZ LES CONCESSIONNAIRES LOCAUX:

menu-circlecross-circle