Description
Slender Seal
Slender Seal est un nouveau système d'étanchéité qui s'adapte à tous les modèles GRABO, y compris Nemo GRABO, GRABO Pro lifter-20, RTC tools GRABO, FXAH-120 Probst GRABO, Topspin Powertools GRABO et d'autres unités de marque commune.
Pour soulever des surfaces plus longues et plus étroites, telles que des carreaux, des pavés, des tuyaux ou des tables de travail découpées.
La capacité de levage maximale est de 60 kg (132 lb).
GRABO Spécifications du joint mince :
Joint en mousse noire | |
---|---|
Matériau | Éponge en caoutchouc SBR |
Couleur | Noir |
L x W x H | 16.2 x 6.9 x 1.24” (411 x 175 x 31.5 mm) |
Dimension du joint | 371 x 65 mm |
Densité | 10.6 Lb/cft (170 kg/m^3) |
Dureté, Shore C | ~10 +/-2 |
Pression de déchirement | 1800 Psi (126 kg/cm^2) |
Compression à 25 % à | 8.5 Psi (6000 kg/m^2) |
Durée de vie (compressions jusqu'à la réduction des performances). | ~900 |
Absorption de l'eau, % | <=5 |
Rétrécissement à 160F (70C) pendant 24 heures, en %. | <=20 |
Température de stockage recommandée | Température ambiante |
Sceau rouge | |
Matériau | Mousse de silicone |
Couleur | Rouge |
L x W x H | 16.2 x 6.9 x 1.24” (411 x 175 x 31.5 mm) |
Densité | 40.5 Lb/cft (650 kg/m^3) |
Dureté, Shore C | 55 +/-5 |
Absorption de l'eau, % | <=4 |
Température de stockage recommandée | Température ambiante |
Sceau complet | |
Caractéristiques | Joint combiné sur cadre en plastique Profil mince |
Capacité de levage:
Perpendicular Hold Z | Parallel Hold Y | Parallel Hold X | ||||
---|---|---|---|---|---|---|
Maximum value | Safe value(50%) | Maximum value | Safe value(50%) | Maximum value | Safe value(50%) | |
Verre | 225 Lbs (100kg) | 110 Lbs (50kg) | 110 Lbs (50kg) | 55 Lbs (25kg) | 220 Lbs (100kg) | 110 Lbs (50kg) |
Métal | 145 Lbs (66kg) | 72.5 Lbs (33kg) | 110 Lbs (50kg) | 55 Lbs (25kg) | 220 Lbs (100kg) | 110 Lbs (50kg) |
Bois | 132 Lbs (60kg) | 66 Lbs (30kg) | 66 Lbs (30kg) | 33 Lbs (15kg) | 176 Lbs (80kg) | 88 Lbs (40kg) |
Béton brut | 105 Lbs (48kg) | 52.5 Lbs (24kg) | 110 Lbs (50kg) | 33 Lbs (15 kg) | 220 Lbs (100kg) | 110 Lbs (50kg) |
Chris Taylor –
The plates are well built and hold the cabinets perfectly in place. Saves so much time and hassle.
Greg Burton –
I unboxed this and attached it to the side of my safe. Pulled it around the shop. So, I got another one and attached foot holds with ropes to them. Now I’m climbing glass buildings like Spider-Man with them. You could probably pick up glass and tile with them, but I’d rather be Spider-Man, so that’s what I’m gonna do. In a world full of tile setters, be Spider-Man. Kirk out!
Review source: Amazon
Li•• ••le –
The media could not be loaded. This gadgets does what the cheap $10 suction cups from the local hardware store cannot do. It lifts pavers that are not perfectly smooth. I am not sure if it lifts the kind of pavers that look like giant vitamin tablets (with lots of little holes/cracks). It does lift my 18 inch pavers from Home Depot that weight about 40 pounds each. The paver tiles are not perfectly smooth like marble. They have a texture, but they are not the large pores like on the cheaper pavers that are commonly sold in the hardware stores. Thank goodness I did not have to buy a suction gadget that requires an air compressor. This helps a lot because when I was dropping the paver tiles by hand they would disturb the flattened sand bed. Even if I dropped the paver just about 1 inch from the ground, the sand would be disturbed, and I would have pavers that were a little uneven. I would have to pull them up and fix the sand. With this gadget, I will not have to do that. I can lay the paver tiles with very good control and not disturb the level sand. I LOVE this thing.
Review Source: ubuy.hu
Carl Hilton –
Really good bit of kit (so far)
Review Source: dortechdirect.co.uk