Descriere
The GRABO Slender Seal
Slender Seal este o nouă garnitură de etanșare care se potrivește pentru ambele modele de GRABO, pentru a crea o zonă de contact de suprafață mai subțire. În anumite circumstanțe, amprenta standard GRABO este prea lată pentru a adera la unele materiale, cum ar fi dalele de metrou, grinzi din lemn sau dale din lemn, iar această garnitură de 4 inchi permite acum prinderea acestor materiale.
Capacitatea maximă de ridicare este de 132 de lire sterline (60 de kg).
GRABO Slender Seal specificații:
Garnitură de etanșare din spumă neagră. | |
---|---|
Materiale | Spumă de cauciuc SBR |
Culoare | Negru |
L x W x H | 16.2 x 6.9 x 1.24” (411 x 175 x 31.5 mm) |
Dimensiunea etanșării | 371 x 65 mm |
Densitate | 10.6 Lb/cft (170 kg/m^3) |
Duritate, Shore C | ~10 +/-2 |
Presiunea de rupere | 1800 Psi (126 kg/cm^2) |
25% dimensiune de comprimare la | 8.5 Psi (6000 kg/m^2) |
Durata de viață (compresiuni până la reducerea performanțelor). | ~900 |
Absorbția de apă, % | <=5 |
Contracția la 160F (70C) timp de 24 de ore, % | <=20 |
Temperatura recomandată de depozitare. | Temperatura camerei |
Sigiliu roșu | |
Materiale | Spumă de silicon |
Culoare | Roșu |
L x W x H | 16.2 x 6.9 x 1.24” (411 x 175 x 31.5 mm) |
Densitate | 40.5 Lb/cft (650 kg/m^3) |
Duritate, Shore C | 55 +/-5 |
Absorbția de apă, % | <=4 |
Temperatura recomandată de depozitare. | Temperatura camerei |
Etanșeizare completă | |
Caracteristici | Garnitura de etansare combinata pe rama de plastic. Profilul subtire. |
Lifting Capacity:
Prindere perpendiculară Z | Prindere perpendiculară Y | Prindere perpendiculară X | ||||
---|---|---|---|---|---|---|
Valoare maximă | Valoare sigură(50%) | Valoare maximă | Valoare sigură(50%) | Valoare maximă | Valoare sigură(50%) | |
Glass | 225 Lbs (100kg) | 110 Lbs (50kg) | 110 Lbs (50kg) | 55 Lbs (25kg) | 220 Lbs (100kg) | 110 Lbs (50kg) |
Metal | 145 Lbs (66kg) | 72.5 Lbs (33kg) | 110 Lbs (50kg) | 55 Lbs (25kg) | 220 Lbs (100kg) | 110 Lbs (50kg) |
Wood | 132 Lbs (60kg) | 66 Lbs (30kg) | 66 Lbs (30kg) | 33 Lbs (15kg) | 176 Lbs (80kg) | 88 Lbs (40kg) |
Rough Concrete | 105 Lbs (48kg) | 52.5 Lbs (24kg) | 110 Lbs (50kg) | 33 Lbs (15 kg) | 220 Lbs (100kg) | 110 Lbs (50kg) |
Nick Samson –
I recently added the GRABO Erguo S1 to my tool collection, I work in construction so this tool eases my back a lot. Its perfect for handling large awkward materials like drywall and glass panels. The build quality is top notch and it feels sturdy. The GRABO Erguo S1 has made my job much more efficient and less physically demanding. Highly recommend it to anyone who frequently works with heavy materials or has to bend down a lot.
Li•• ••le –
The media could not be loaded. This gadgets does what the cheap $10 suction cups from the local hardware store cannot do. It lifts pavers that are not perfectly smooth. I am not sure if it lifts the kind of pavers that look like giant vitamin tablets (with lots of little holes/cracks). It does lift my 18 inch pavers from Home Depot that weight about 40 pounds each. The paver tiles are not perfectly smooth like marble. They have a texture, but they are not the large pores like on the cheaper pavers that are commonly sold in the hardware stores. Thank goodness I did not have to buy a suction gadget that requires an air compressor. This helps a lot because when I was dropping the paver tiles by hand they would disturb the flattened sand bed. Even if I dropped the paver just about 1 inch from the ground, the sand would be disturbed, and I would have pavers that were a little uneven. I would have to pull them up and fix the sand. With this gadget, I will not have to do that. I can lay the paver tiles with very good control and not disturb the level sand. I LOVE this thing.
Review Source: ubuy.hu
G. Myrick –
I have been using it to lift plywood panels, which at age 72 is not easy for me. The GRABO is a tremendous help. I was working with a sheet of 3/8 Doug/fir AC plywood, and it grabbed onto the A side, pulled the vacuum and would then shut off, restarting in about 45 seconds, when it had lost a certain amount of vacuum. After cutting the plywood down to 43x76, I grabbed the C side to carry it out and place it on rafters. The GRABO grabbed on fine but ran continuously. It never slipped. I also intend this for use with a small vacuum bag, and a Festool type board holder for sanding and routing.
Review source: Amazon
Michael K. –
I highly recommend the Slenderseal. It's perfect for any job site or home renovation project. The construction is durable and the design is innovative.