+1 (844) 430-0510
USD0.00

GRABO PRO (2023 version) (EU)

Przenośny elektryczny podnośnik próżniowy, wyposażony w cyfrowy manometr, który znajduje się na rączce i umożliwia łatwe odczytywanie ciśnienia. Automatyczne czujniki ciśnienia zapewniają stałą próżnię. Akumulatory o możliwości ponownego ładowania zasilają podnośnik próżniowy, który może podnosić obiekty o wadze do 375 funtów (170 kg).

Zestaw zawiera:

  • Przenośny elektryczny podnośnik próżniowy GRABO Pro z cyfrowym manometrem
  • Automatyczny czujnik ciśnienia włącza i wyłącza pompę, aby zapewnić stałe ciśnienie próżniowe.
  • Pojemność pompy: 20 litrów na minutę daje ogromną zdolność podnoszenia
  • 1 akumulator i ładowarka z adapterami międzynarodowymi
  • Uszczelka z pianki kauczukowej już zamontowana na narzędziu
  • Wytrzymała torba z nylonu
  • Filtry zapasowe
  • Instrukcja obsługi w języku angielskim z kolorowym opakowaniem.

USD299.99

SKU: GP-1Li-FB-1S Kategoria: GTIN: 840082400462
Free Shipping. Fullfilled by GRABO dealers near you

USD299.99

It seems like you're attempting to make a wholesale order. Please register to view our wholesale / dealer shop for better pricing, Join as a Wholesaler.

Opis

Narzędzie GRABO Pro wyposażone w inteligentny wyświetlacz ciśnienia cyfrowego wygodnie umieszczony na rączce z wyświetlaniem ciśnienia (PSI, Bar) i wagi (Kg, Lb). GRABO Pro posiada wbudowany czujnik ciśnienia, który automatycznie włącza i wyłącza pompę próżniową, aby utrzymać stałą pożądaną zdolność podnoszenia. Pompa próżniowa GRABO Pro przemieszcza 20 litrów powietrza na minutę, co daje ogromną zdolność podnoszenia i jest w stanie podnosić niemal każdą powierzchnię o wadze do 375 funtów (170 kg). Opatentowana piankowa uszczelka, która jest dostarczana wraz z narzędziem GRABO Pro, jest mocna i odporna na ścieranie, a jednocześnie łatwa do wymiany w przypadku uszkodzenia. Po aktywacji narzędzia uszczelka tworzy się w ciągu kilku sekund i mocno przylega do niemal każdej powierzchni, w tym do powierzchni nierównych i lekko porowatych. GRABO Pro jest wyposażony w cztery stalowe uchwyty podnoszące umieszczone po obu stronach rączki narzędzia. Pozwala to na użycie narzędzia z pasami podnoszącymi i dodatkowymi akcesoriami.

GRABO Pro jest objęty pełną fabryczną gwarancją 12 miesięcy, którą można przedłużyć do 18 miesięcy po zarejestrowaniu produktu na naszej stronie internetowej. Dzięki profesjonalnemu wsparciu technicznemu z siedzibą w USA, jeśli napotkasz jakieś problemy, nie wahaj się powiedzieć nam. Jesteśmy tu, aby utrzymać cię w pracy!

Informacje dodatkowe

Waga 7 funty

Opinie

Na razie nie ma opinii o produkcie.

Tylko zalogowani klienci, którzy kupili ten produkt mogą napisać opinię.

GRABO jest obsesyjnie związana z jakością.
W przeciwieństwie do wielu innych marek narzędzi elektrycznych, nie korzystamy z OEM-owej produkcji firm trzecich. Posiadamy własną w pełni zarządzaną fabrykę GRABO. Dzięki temu możemy zaoferować naszym klientom najlepszą wartość za ich pieniądze i utrzymać najwyższe standardy jakości. 

Bezproblemowo podnieś i przesuń nawet największe instalacje podłogowe, kawałek po kawałku. Delikatnie przenieś kruche płytki i elementy krajobrazowe z jednego pomieszczenia do drugiego. 

CO INNI MYSLA O GRABO

Dla nas ważne jest, aby dostarczyć Ci uczciwe i zweryfikowane opinie od prawdziwych profesjonalistów. Kliknij w recenzję, aby zobaczyć jej źródło i przeczytać więcej zweryfikowanych opinii z Amazon, grup zawodowych na Facebooku i innych źródeł.

  1. Polski

    Donald Sherman

    Christmas came early, this four pack helps my entire team and I.

  2. Polski

    A. Dioguardi

    What do you get?
    A battery operated vacuum suction cup with carrying case.

    How does it work?
    Release the battery compartment, slide out the battery holder, install four AA batteries. Slide the holder back in and you’re ready to go.
    Push the suction cup against a flat surface, press the green button and you’ll hear the vacuum pump start. There’s a suction guage that SHOULD start to move when the pump starts. IF it doesn’t, the cup is not properly sealed against the surface. Once the guage reaches the green “zone” and maintains it for 3 seconds the pump will automatically turn off. If the tool begins to lose it’s suction the pump will turn back on and attempt to restore the vacuum into the green zone.
    Once you’re done. Simply push the green button a second time to turn off power to the pump. If you hit the vacuum release collar before you do this the pump will kick on and try to restore the vacuum. Not a huge deal, just push the button. But why make the pump work any longer than it has to.
    You’ll notice that there are multiple filter holes in the suction cup, most of these tools only have one. I’m going to assume one goes to vacuum guage and one goes to a vacuum sensor. Just a guess. In the manual there are rudimentaty instructions on how to change the white vacuum filter. Basically “remove fitler with the tip of a screw driver. Then push the replacement filter into the bottom plate and secure it” One of those “it sounds simple enough until you have to do it” instructions
    It somes with a nice cushioned carrying case to ptotect it. But doesn;t come with batteries. I took batteries that worked in my TV remotes, but they must have been close to depleted because the pump sounded like it was laboring. Put four fresh batteries in and it worked like a champ. So if you use this a lot you might want to invest in some rechargeable batteries.. The manual also suggests you remove the batteries when not in use.
    It’ll grip glass, drywall, tile etc ANYTHING WITH A SMOOTH surface. You might dream about going all Mission Impossible with these and start climbing buidings. Obviously I’m not the first one to think that, since there’s a very specific warning in the manual about NOT doing so. (I still think it would be cool) Under IDEAL LAB CONDITIONS it’s rated at 440lbs. Under WORKING CONDITIONS it’s rated at half that or 220lbs. So I hope you’re not too heavy.
    The benefit of this tool over others. NO pumping, there a guage to let you know the vacuum is holding and it automatically restores the vacuum should it begin to fail.
    The ultimate question: Is it a good value at $150? If you just need it occasionally perhaps a PAIR of another brand for $60 will work for you. If you need this for your livelihood, it might be worth it. I’ll leave that up to you to decide.

    Review source: Amazon

  3. Polski

    Julie

    Had borrowed one from a friend last winter and it worked well. I bought my own for a specific project I was doing. This tool works excellent. I laid a 175 sq.ft. stone floor (about 50 – 24″”x24″”x1 1/4″” stones and cuts) The stones weigh about 50 lbs and have a rough thermal finish. The Grabo lifted with no problem. I was showing it to a carpenter and even on a plywood wall I could not pull it off . Highly recommend this tool.
    Also only used half the battery life over the two days of setting stone.

    Review source: Amazon

  4. Polski

    John P.

    I was hesitant to try the GRABO Brace Seal, but I’m so glad I did. It’s made my work so much easier and more efficient. Highly recommend!

Wyświetl wszystkie opinie

KUPUJ OD LOKALNYCH DEALERÓW.

menu-circlecross-circle