+1 (844) 430-0510

GRABO batterij

De GRABO-batterij is een hoogwaardige lithium-ionbatterij met een capaciteit van 14,8VDC en 2600mAh. Het is speciaal ontworpen om op alle GRABO-modellen te passen, waardoor compatibiliteit en optimale prestaties worden gegarandeerd. Deze batterij is een uitstekende vervanging of back-up stroombron voor uw GRABO-apparaat.


Artikelnummer: GB2500 Categorie: GTIN: 840082400059
Free Shipping. Fullfilled by GRABO dealers near you


It seems like you're attempting to make a wholesale order. Please register to view our wholesale / dealer shop for better pricing, Join as a Wholesaler.


Hoog capaciteit batterij – past op alle modellen (14,8VDC 2600mAh Li-ion) verpakt in een volledige kleuren doos.

4-cel lithium-ion batterij voor alle GRABO-modellen. Past op “Nemo GRABO”, “GRABO Pro”, “GRABO Plus”, “PROBST FXAH GRABO”.

GRABO battery

Specificaties voor de GRABO extra batterij:


Samenstelling van de batterijcellen

Lithium Ion
Aantal eenheden 1 Count
Spanning 14.8 Volts

Gewicht van het item

7.04 Ounces
  • Topkwaliteit
  • Osha goedgekeurd
  • Werktijd bij volledig opgeladen: 1,5 uur
  • 2 uur oplaadtijd
  • Perfect voor industriële en commerciële toepassingen

Extra informatie

Gewicht 1 lbs


Er zijn nog geen beoordelingen.

Enkel ingelogde klanten die dit product gekocht hebben, kunnen een beoordeling schrijven.

Echte makers en professionals in de industrie zijn dol op GRABO. Bekijk de eerste reactie van Izzy Swan op GRABO, zijn geweldige demonstraties en creatieve op maat gemaakte toevoegingen. 

Verplaats naadloos zelfs de grootste vloerinstallaties, stuk voor stuk. Verplaats fragiele tegels en bestrating voorzichtig van de ene naar de andere kamer. 


Het is belangrijk voor ons om u eerlijke geverifieerde beoordelingen te geven van echte professionals. Klik op de beoordeling om de bron te bekijken en meer geverifieerde getuigenissen te lezen van Amazon, FB-professionele groepen en meer bronnen.

  1. Nederlands

    A. Dioguardi

    What do you get?
    A battery operated vacuum suction cup with carrying case.

    How does it work?
    Release the battery compartment, slide out the battery holder, install four AA batteries. Slide the holder back in and you’re ready to go.
    Push the suction cup against a flat surface, press the green button and you’ll hear the vacuum pump start. There’s a suction guage that SHOULD start to move when the pump starts. IF it doesn’t, the cup is not properly sealed against the surface. Once the guage reaches the green “zone” and maintains it for 3 seconds the pump will automatically turn off. If the tool begins to lose it’s suction the pump will turn back on and attempt to restore the vacuum into the green zone.
    Once you’re done. Simply push the green button a second time to turn off power to the pump. If you hit the vacuum release collar before you do this the pump will kick on and try to restore the vacuum. Not a huge deal, just push the button. But why make the pump work any longer than it has to.
    You’ll notice that there are multiple filter holes in the suction cup, most of these tools only have one. I’m going to assume one goes to vacuum guage and one goes to a vacuum sensor. Just a guess. In the manual there are rudimentaty instructions on how to change the white vacuum filter. Basically “remove fitler with the tip of a screw driver. Then push the replacement filter into the bottom plate and secure it” One of those “it sounds simple enough until you have to do it” instructions
    It somes with a nice cushioned carrying case to ptotect it. But doesn;t come with batteries. I took batteries that worked in my TV remotes, but they must have been close to depleted because the pump sounded like it was laboring. Put four fresh batteries in and it worked like a champ. So if you use this a lot you might want to invest in some rechargeable batteries.. The manual also suggests you remove the batteries when not in use.
    It’ll grip glass, drywall, tile etc ANYTHING WITH A SMOOTH surface. You might dream about going all Mission Impossible with these and start climbing buidings. Obviously I’m not the first one to think that, since there’s a very specific warning in the manual about NOT doing so. (I still think it would be cool) Under IDEAL LAB CONDITIONS it’s rated at 440lbs. Under WORKING CONDITIONS it’s rated at half that or 220lbs. So I hope you’re not too heavy.
    The benefit of this tool over others. NO pumping, there a guage to let you know the vacuum is holding and it automatically restores the vacuum should it begin to fail.
    The ultimate question: Is it a good value at $150? If you just need it occasionally perhaps a PAIR of another brand for $60 will work for you. If you need this for your livelihood, it might be worth it. I’ll leave that up to you to decide.

    Review source: Amazon

  2. Nederlands

    Amazon Customer

    Seriously. If you’re doing flagstone and you don’t have this tool, you don’t know what you’re missing. Really shines after you puzzle-in all your rocks and have to lift each one out to level individually. No easier way. Grab the handle and lift it out without disturbing anything around it including existing sand base. Set it back in with stability and precision. Way better tool than I though it would be. Worth every penny.

    Review source: Amazon

  3. Nederlands

    Yaki Sarah

    I’m impressed with the precision of the GRABO 90 Degree Stone Seam Setter. My countertops look flawless thanks to this tool. I would highly recommend it to anyone working with stone countertops.

  4. Nederlands

    J. Lala

    No more straining my back and shoulders thanks to the Erguo S1. Love it!

Bekijk alle beoordelingen