+1 (844) 430-0510

PRODUITS GRABO

Portable, powerful & effortless lifting solution.

GRABO HIGH FLOW

USD599.99

OTTOVAC

USD129.99

GRABO CHARGER

USD19.99

FOAM SEAL 400

USD34.99

FOAM SEAL 300

USD29.99

GRABO REMOTE

USD99.99

ERGUO T

USD199.99

GRABO SEAM SETTER

USD149.99

Chargeur GRABO USA

USD19.99

GRABO Slender Seal

USD51.99

GRABO RockSeal™

USD29.99

GRABO Erguo

USD99.99

Sac en toile GRABO

USD20.99

GRABO PRO IN HARDSHELL CASE

USD331.99

OTTOVAC

USD129.99

OTTOVAC Li-ION BATTERY

USD29.99

OPEN CELL FOAM SEAL 80

USD29.99

1500mm WIRED CABLE FOR GRABO HIGH FLOW

USD19.99

GRABO Slender Seal

USD51.99

GRABO Erguo

USD99.99

Les vrais fabricants et professionnels de l'industrie adorent GRABO. Regardez la première réaction d'Izzy Swan à GRABO, ses excellentes démonstrations et ses ajouts personnalisés créatifs.

GRABO est obsédé par la qualité.
Contrairement à de nombreuses marques d'outils électriques, nous ne choisissons pas d'utiliser la production OEM de tiers. Nous avons notre propre usine GRABO entièrement détenue et gérée. Cela nous permet d'offrir à nos clients la meilleure valeur pour leur argent et de maintenir les normes de qualité les plus élevées.

Déplacez sans effort et déplacez même les plus grandes installations de revêtement de sol, pièce par pièce. Déplacez délicatement les carreaux fragiles et l'aménagement paysager d'une pièce à l'autre.

Oui ! Nous sommes présents sur les réseaux sociaux ! Connectez-vous avec nous sur votre plateforme préférée pour rester informé des nouveaux lancements de produits, des cadeaux, des astuces et des informations générales sur les outils Grabo !

QUE PENSENT LES AUTRES DE GRABO

Il est important pour nous de vous fournir des avis honnêtes et vérifiés provenant de professionnels réels. Cliquez sur l'avis pour voir sa source et lire d'autres témoignages vérifiés provenant d'Amazon, de groupes professionnels Facebook et d'autres sources.

  1. A. Dioguardi

    What do you get?
    A battery operated vacuum suction cup with carrying case.

    How does it work?
    Release the battery compartment, slide out the battery holder, install four AA batteries. Slide the holder back in and you're ready to go.
    Push the suction cup against a flat surface, press the green button and you'll hear the vacuum pump start. There's a suction guage that SHOULD start to move when the pump starts. IF it doesn't, the cup is not properly sealed against the surface. Once the guage reaches the green "zone" and maintains it for 3 seconds the pump will automatically turn off. If the tool begins to lose it's suction the pump will turn back on and attempt to restore the vacuum into the green zone.
    Once you're done. Simply push the green button a second time to turn off power to the pump. If you hit the vacuum release collar before you do this the pump will kick on and try to restore the vacuum. Not a huge deal, just push the button. But why make the pump work any longer than it has to.
    You'll notice that there are multiple filter holes in the suction cup, most of these tools only have one. I'm going to assume one goes to vacuum guage and one goes to a vacuum sensor. Just a guess. In the manual there are rudimentaty instructions on how to change the white vacuum filter. Basically "remove fitler with the tip of a screw driver. Then push the replacement filter into the bottom plate and secure it" One of those "it sounds simple enough until you have to do it" instructions
    It somes with a nice cushioned carrying case to ptotect it. But doesn;t come with batteries. I took batteries that worked in my TV remotes, but they must have been close to depleted because the pump sounded like it was laboring. Put four fresh batteries in and it worked like a champ. So if you use this a lot you might want to invest in some rechargeable batteries.. The manual also suggests you remove the batteries when not in use.
    It'll grip glass, drywall, tile etc ANYTHING WITH A SMOOTH surface. You might dream about going all Mission Impossible with these and start climbing buidings. Obviously I'm not the first one to think that, since there's a very specific warning in the manual about NOT doing so. (I still think it would be cool) Under IDEAL LAB CONDITIONS it's rated at 440lbs. Under WORKING CONDITIONS it's rated at half that or 220lbs. So I hope you're not too heavy.
    The benefit of this tool over others. NO pumping, there a guage to let you know the vacuum is holding and it automatically restores the vacuum should it begin to fail.
    The ultimate question: Is it a good value at $150? If you just need it occasionally perhaps a PAIR of another brand for $60 will work for you. If you need this for your livelihood, it might be worth it. I'll leave that up to you to decide.

    Review source: Amazon

  2. Elizabeth P.

    I've been using this charger for several months and it works great. No more searching for compatible chargers while traveling.

  3. Brandon David

    The GRABO 90 Degree Stone Seam Setter is an essential tool for any stone countertop project. It's so easy to use and the results are always perfect. I'm glad I purchased this product.

  4. Amelia H

    The GRABO Foam Seal is a game changer! Easy to install and fits perfectly on all GRABO models.

View All Reviews

BUY FROM LOCAL DEALERS:

menu-circlecross-circle