+1 (844) 430-0510
USD0.00

Comment fonctionne la commande à travers GRABO ?

Êtes-vous prêt à commander un outil de levage électrique GRABO ou d'autres outils de notre catalogue en ligne ? En travaillant avec nos distributeurs autorisés, il est rapide et facile de planifier une fenêtre de livraison qui vous convient. Voici comment fonctionne le processus de commande :

Vous commandez, nous correspondons.

Passez votre commande sur notre boutique en ligne en utilisant un mode de paiement accepté. Une fois que nous avons reçu et examiné votre demande, nous consultons nos distributeurs agréés locaux.
Cela nous permet de trouver le distributeur le plus proche de votre adresse de livraison. Vous bénéficiez ainsi d'une expédition rapide et locale. De plus, vous ne commandez qu'à un seul endroit - GRABO en ligne. Nous transférons votre commande aux distributeurs locaux qui ont du stock disponible.
Cependant, veuillez garder à l'esprit que bien que Nemo GRABO vise à être aussi efficace que possible avec votre commande, les niveaux de stock peuvent varier. Cela est dû au fait que nous travaillons avec un large éventail de concessionnaires différents. Les niveaux de stock dans un entrepôt local peuvent différer du suivant. Cela signifie, de manière cruciale, que votre commande peut être composée de livraisons provenant de plusieurs endroits.

Qu'est-ce que cela signifie pour moi ?

Ne vous inquiétez pas, cela ne compliquera pas votre commande ! Nous restons en contact avec notre réseau de détaillants locaux pour nous assurer que nous pouvons combiner les stocks pour votre commande particulière.
Par exemple, vous pourriez avoir besoin de batteries ainsi que d'un lève-ventouses GRABO. Si un distributeur n'a que le lève-ventouses et pas les batteries, nous devrons contacter une autre source locale. C'est simple !
Nous facturons à nos distributeurs locaux les mêmes tarifs que nous facturons à nos clients. Cela contribue à maintenir les choses justes et simples, et cela signifie que vous pouvez recevoir vos outils GRABO dès que vous en avez besoin.

Commandez aujourd'hui !

Commander via GRABO en ligne ne pourrait pas être plus simple. Notre modèle de distribution en réseau nous permet de répondre aux commandes spéciales 24 heures sur 24. Pourquoi dépendre d'un seul entrepôt lorsque vous pouvez en utiliser plusieurs ?
Dans la mesure du possible, nous vous encourageons à commander directement chez votre détaillant GRABO le plus proche. Cependant, il est tout aussi efficace et simple de commander en ligne avec nous - jetez un coup d'œil et voyez !

QUE PENSENT LES AUTRES DE GRABO

Il est important pour nous de vous fournir des avis honnêtes et vérifiés provenant de professionnels réels. Cliquez sur l'avis pour voir sa source et lire d'autres témoignages vérifiés provenant d'Amazon, de groupes professionnels Facebook et d'autres sources.

  1. Tyler Mitchell

    Just started using the Rock Seal for my masonry work. The grip is insanely strong even on rough and uneven surfaces and now I can lift heavy stone pieces easier. Highly recommend if you need a reliable seal for rocky surfaces.

  2. A. Dioguardi

    What do you get?
    A battery operated vacuum suction cup with carrying case.

    How does it work?
    Release the battery compartment, slide out the battery holder, install four AA batteries. Slide the holder back in and you're ready to go.
    Push the suction cup against a flat surface, press the green button and you'll hear the vacuum pump start. There's a suction guage that SHOULD start to move when the pump starts. IF it doesn't, the cup is not properly sealed against the surface. Once the guage reaches the green "zone" and maintains it for 3 seconds the pump will automatically turn off. If the tool begins to lose it's suction the pump will turn back on and attempt to restore the vacuum into the green zone.
    Once you're done. Simply push the green button a second time to turn off power to the pump. If you hit the vacuum release collar before you do this the pump will kick on and try to restore the vacuum. Not a huge deal, just push the button. But why make the pump work any longer than it has to.
    You'll notice that there are multiple filter holes in the suction cup, most of these tools only have one. I'm going to assume one goes to vacuum guage and one goes to a vacuum sensor. Just a guess. In the manual there are rudimentaty instructions on how to change the white vacuum filter. Basically "remove fitler with the tip of a screw driver. Then push the replacement filter into the bottom plate and secure it" One of those "it sounds simple enough until you have to do it" instructions
    It somes with a nice cushioned carrying case to ptotect it. But doesn;t come with batteries. I took batteries that worked in my TV remotes, but they must have been close to depleted because the pump sounded like it was laboring. Put four fresh batteries in and it worked like a champ. So if you use this a lot you might want to invest in some rechargeable batteries.. The manual also suggests you remove the batteries when not in use.
    It'll grip glass, drywall, tile etc ANYTHING WITH A SMOOTH surface. You might dream about going all Mission Impossible with these and start climbing buidings. Obviously I'm not the first one to think that, since there's a very specific warning in the manual about NOT doing so. (I still think it would be cool) Under IDEAL LAB CONDITIONS it's rated at 440lbs. Under WORKING CONDITIONS it's rated at half that or 220lbs. So I hope you're not too heavy.
    The benefit of this tool over others. NO pumping, there a guage to let you know the vacuum is holding and it automatically restores the vacuum should it begin to fail.
    The ultimate question: Is it a good value at $150? If you just need it occasionally perhaps a PAIR of another brand for $60 will work for you. If you need this for your livelihood, it might be worth it. I'll leave that up to you to decide.

    Review source: Amazon

  3. Yasniel

    Muy buena herramienta, batería de buen rendimiento!!

    Review source: Amazon

  4. Julie

    Had borrowed one from a friend last winter and it worked well. I bought my own for a specific project I was doing. This tool works excellent. I laid a 175 sq.ft. stone floor (about 50 - 24""x24""x1 1/4"" stones and cuts) The stones weigh about 50 lbs and have a rough thermal finish. The Grabo lifted with no problem. I was showing it to a carpenter and even on a plywood wall I could not pull it off . Highly recommend this tool.
    Also only used half the battery life over the two days of setting stone.

    Review source: Amazon"

View All Reviews

BUY FROM LOCAL DEALERS:

menu-circlecross-circle