+1 (844) 430-0510
Factory shop
USD0.00
GRABO replacement seal

GRABO Standard Foam Seal

(7 valoraciones de clientes)

La junta de goma-espuma tipo A1 es una junta de goma patentada de célula cerrada y alta fricción, diseñada específicamente para todos los modelos GRABO. La junta está fabricada con materiales duraderos que proporcionan un ajuste firme y seguro, manteniendo el polvo y la suciedad fuera de su herramienta GRABO. Este producto se presenta en una caja a todo color, lo que facilita su identificación y almacenamiento. Actualice su herramienta GRABO con la junta de goma-espuma tipo A1 para obtener un rendimiento más eficaz y fiable.

USD21.99

SKU: RK13001 Categoría: GTIN: 840082400042
Free Shipping. Fullfilled by GRABO dealers near you

USD21.99

It seems like you're attempting to make a wholesale order. Please register to view our wholesale / dealer shop for better pricing, Join as a Wholesaler.

Descripción

Con el uso continuado, las juntas se desgastan. Cuando la junta GRABO finalmente se desgasta, la capacidad de elevación disminuye. En este caso, puede sustituir la junta desgastada a mano en cuestión de segundos.
Puede utilizar la de repuesto suministrada con el kit. Alternativamente, puede comprar otras tantas a cualquiera de los distribuidores o minoristas. Esta junta de gomaespuma de alta fricción patentada se adapta a todos los modelos GRABO.
GRABO replacement seal

Specifications:

Junta de espuma negra
Material Esponja de espuma de caucho SBR
Color Negro
L x W x H 11.5 x 6.9 x 0.7” (293 x 175 x 19 mm)
Densidad 10.6 Lb/cft (170 kg/m^3)
Dureza, Shore C ~10 +/-2
Presión de desgarro 1800 Psi (126 kg/cm^2)
Compresión al 25% de tamaño en 8.5 Psi (6000 kg/m^2)
Absorción de agua, %. <=5
Contracción a 160F (70C) durante 24 h, %. <=20
Temperatura de almacenamiento recomendada Temperatura ambiente
Sello rojo
Material Espuma de silicona
Color Rojo
Densidad 40.5 Lb/cft (650 kg/m^3)
Dureza, Shore C 55 +/-5
Absorción de agua, %. <=4
Temperatura de almacenamiento recomendada Temperatura ambiente

SKU: RK13001

Información adicional

Peso 1 lbs

7 valoraciones en GRABO Standard Foam Seal

  1. Español

    Amelia H –

    The GRABO Foam Seal is a game changer! Easy to install and fits perfectly on all GRABO models.

  2. Español

    Richard Lison –

    This foam seal has improved the performance of my GRABO vacuum significantly. No more leaks!

  3. Español

    Harry L.A –

    The patented design of this foam seal is genius. It is durable and provides a tight seal every time.

  4. Español

    John M –

    I was skeptical at first, but the high friction rubber truly makes a difference. My GRABO now works better than ever.

  5. Español

    Karol B –

    I highly recommend the GRABO Foam Seal to anyone looking to upgrade their vacuum. It is well worth the investment.

  6. Español

    Henrique Blossom –

    The GRABO Foam Seal is a must-have for any GRABO vacuum owner. Easy to install and great results.

  7. Español

    Doe J –

    This foam seal has made a huge difference in the suction power of my GRABO vacuum. Highly recommended!

Solo los usuarios registrados que hayan comprado este producto pueden hacer una valoración.

GRABO está obsesionado con la calidad.
A diferencia de muchas marcas de herramientas eléctricas, optamos por no utilizar la fabricación de terceros OEM. Tenemos nuestra propia fábrica de propiedad total y gestionada por GRABO. Esto nos permite brindar a nuestros clientes el mejor valor por su dinero y mantener los más altos estándares de calidad. 

Recoge y mueve sin problemas incluso las instalaciones de suelo más grandes, pieza por pieza. Mueve con delicadeza azulejos frágiles y paisajismo de una habitación a otra. 

QUÉ PIENSAN LOS DEMÁS DE GRABO

Es importante para nosotros proporcionarte opiniones honestas y verificadas de profesionales reales. Haz clic en la reseña para ver su fuente y leer más testimonios verificados de Amazon, grupos profesionales de Facebook y otras fuentes.

  1. Español

    Tom Rudder –

    The seam setter worked out great, better than my old pump seamer.

  2. Español

    Greg Burton –

    I unboxed this and attached it to the side of my safe. Pulled it around the shop. So, I got another one and attached foot holds with ropes to them. Now I’m climbing glass buildings like Spider-Man with them. You could probably pick up glass and tile with them, but I’d rather be Spider-Man, so that’s what I’m gonna do. In a world full of tile setters, be Spider-Man. Kirk out!

    Review source: Amazon

  3. Español

    A. Dioguardi –

    What do you get?
    A battery operated vacuum suction cup with carrying case.

    How does it work?
    Release the battery compartment, slide out the battery holder, install four AA batteries. Slide the holder back in and you’re ready to go.
    Push the suction cup against a flat surface, press the green button and you’ll hear the vacuum pump start. There’s a suction guage that SHOULD start to move when the pump starts. IF it doesn’t, the cup is not properly sealed against the surface. Once the guage reaches the green “zone” and maintains it for 3 seconds the pump will automatically turn off. If the tool begins to lose it’s suction the pump will turn back on and attempt to restore the vacuum into the green zone.
    Once you’re done. Simply push the green button a second time to turn off power to the pump. If you hit the vacuum release collar before you do this the pump will kick on and try to restore the vacuum. Not a huge deal, just push the button. But why make the pump work any longer than it has to.
    You’ll notice that there are multiple filter holes in the suction cup, most of these tools only have one. I’m going to assume one goes to vacuum guage and one goes to a vacuum sensor. Just a guess. In the manual there are rudimentaty instructions on how to change the white vacuum filter. Basically “remove fitler with the tip of a screw driver. Then push the replacement filter into the bottom plate and secure it” One of those “it sounds simple enough until you have to do it” instructions
    It somes with a nice cushioned carrying case to ptotect it. But doesn;t come with batteries. I took batteries that worked in my TV remotes, but they must have been close to depleted because the pump sounded like it was laboring. Put four fresh batteries in and it worked like a champ. So if you use this a lot you might want to invest in some rechargeable batteries.. The manual also suggests you remove the batteries when not in use.
    It’ll grip glass, drywall, tile etc ANYTHING WITH A SMOOTH surface. You might dream about going all Mission Impossible with these and start climbing buidings. Obviously I’m not the first one to think that, since there’s a very specific warning in the manual about NOT doing so. (I still think it would be cool) Under IDEAL LAB CONDITIONS it’s rated at 440lbs. Under WORKING CONDITIONS it’s rated at half that or 220lbs. So I hope you’re not too heavy.
    The benefit of this tool over others. NO pumping, there a guage to let you know the vacuum is holding and it automatically restores the vacuum should it begin to fail.
    The ultimate question: Is it a good value at $150? If you just need it occasionally perhaps a PAIR of another brand for $60 will work for you. If you need this for your livelihood, it might be worth it. I’ll leave that up to you to decide.

    Review source: Amazon

  4. Español

    Dave Foster –

    I’ve already put it to work, hard, laying bluestone. Amazing tool!!! A complete game-changer for setting un-even stone.

    Review source: Amazon

Ver todas las reseñas

COMPRE A TRAVÉS DE DISTRIBUIDORES LOCALES:

menu-circlecross-circle