Beschreibung
OTTOVAC ist ein tragbares elektrisches Vakuumhebegerät zum Heben und Bewegen von Glas und anderen Materialien mit glatter, ebener und nicht poröser Oberfläche. Der OTTOVAC wird mit 4 AA-Batterien betrieben und verfügt über einen eingebauten Drucksensor mit automatischer Start/Stopp-Funktion. Wenn der Unterdruck im Boden des Saugnapfes -55 kPa erreicht, stoppt die Pumpe automatisch nach einer
Verzögerung von drei Sekunden. Wenn der Unterdruck unter -55 kPa fällt, startet die Pumpe automatisch wieder und erreicht während des Betriebs den erforderlichen Druck.
Foreverbuilding –
This is the real deal! It can lift, hold & place uneven surfaced slate tiles, I’m impressed!! You’ll blow out your back before this baby fails. And what’s included: 1 unit, 2 batteries (so 1 can recharge), 2 gaskets, 1 110v charger, 1 hardcase.
Review source: Amazon
Jorge Hernandez –
I used it to set tile. Works great especially if you have to remove a tile you just set
Review source: Amazon
Joseph –
Makes laying pavers much easier. I tried it on bluestone, concrete pavers and plywood. Doesn’t work on cinder block.
Review Source: Lowe’s
EJ –
I was able to try one of these out from a coworker last Friday. What a device! An elegant and convenient tool. I look forward to ordering my own. It is a great improvement from my home brew vacuum fixture. With some selective attachments I see great potential in not just lifting and holding panels, but also for holding fixtures as I drill or do router template work. This will be like a mag drill for non-magnetic materials. I have always liked the venturi vacuum generators for the shop and the woods grip for everyrhing else. This truly is the best of both. As long as the batteries charge faster than they are depleted in the tool I will be set.
Review source: Amazon