Picked up the Probst Solo for my masonry work, and it’s been awesome. I can lift and place large stones by myself without any hassle.
The Probst Solo is fantastic! I’ve been using it for my patio work, and it’s made everything so much easier. It’s lightweight and portable, so I can easily move it around the job site.
works great with my grabo. Its strong and secure, and it’s super easy to use. If you’re doing any kind of heavy lifting by yourself this tool is a must-have.
If you’re into stone or countertop work this tool is a must have. Makes the job so much easier and the results look professional.
Definitely recommend this for anyone doing countertop work, works great with my grabo pro.
I used this to join some granite slabs, and it worked like a charm. The seams were tight and smooth and the adjustable clamps make aligning everything a so easy.
Got the cabinet plates for a big kitchen reno and they did not disappoint. Installation was smooth and the cabinets are rock solid. Was definetly worth the buy.
The plates are well built and hold the cabinets perfectly in place. Saves so much time and hassle.
These things maade installing my kitchen cabinets so much easier. The plates are super sturdy and easy to use. Highly recommend if you’re into DIY or professional installs
The grip on this is super strong on all the uneven rock surfaces I work with. I bring it with me on all my landscaping projects now.
This seal is the real deal. Fits perfectly and handles rough surfaces like a champ. If you work with stone or concrete a lot this seal is a must have.
Just started using the Rock Seal for my masonry work. The grip is insanely strong even on rough and uneven surfaces and now I can lift heavy stone pieces easier. Highly recommend if you need a reliable seal for rocky surfaces.
Got the Slender Seal recently and it’s been great. Perfect for those slim and awkward items that need lifting. The grip is strong, and it’s easy to install.
I love it, it fits snug and holds tight on all those tricky surfaces. Swapping it out was a breeze and it’s been super reliable. If you need a good seal for tighter spaces, this is the one to get.
The slender seal has been awesome. Fits perfectly and gives a solid grip even on skinny surfaces. Easy to install, and it makes lifting slim items a lot easier.
Grabbed a new seal and its the perfect fit, great grip, and super easy to install.
Super durable and holds strong on every surface. Makes lifting a breeze. Definitely recommend grabbing one if you need a replacement.
This foam rubber seal is legit. Fits perfectly and grips like a champ. Its super easy to swap out too.
The charger is fast and efficient, getting my batteries ready to go in no time.
The charger is built like a tank and doesn't overheat even when you're using it nonstop. Its super easy to pack and take with you. If you need a reliable charger for traveling, this one’s a no brainer.
I travel a lot for work, so I picked up the GRABO International Charger, and it’s been the real mvp. It works perfectly with different voltage systems so I don’t have to worry about frying my charger abroad.
Picked up the GRABO USA charger recently, and it’s been fantastic. The charger is well built and feels durable, and it stays cool even with lots of use.
The Grabo charger is a lifesaver. My old charger was slow and unreliable, but this one is fast and consistent. It charges my batteries quickly, so I can get back to work without much downtime. The charger is sturdy and well-made, and I haven’t had any issues with it overheating. It’s compact and easy to take with me to job sites too
I got the Grabo charger as a replacement for my old one, and it’s been perfect. It charges my batteries quickly and efficiently, which is exactly what I needed. The build quality feels solid, and it doesn’t get too hot, even after charging multiple batteries back-to-back. The compact design makes it easy to store in my toolbox. If you need a reliable charger for your Grabo tools, this one does the job great.
Picked up an additional Ottovac Li-Ion battery, and I’m so glad I did. The battery life is solid, and it charges pretty quickly. It’s really easy to change the batteries, so I can keep my projects moving smoothly. If you’re using your Ottovac for big or multiple projects, having an extra battery is definitely worth it.
I recently got an extra Ottovac Li-Ion battery, and it’s been a great addition to my toolkit so I never have to stop working. Having a spare gives me peace of mind that I won’t run out of power halfway through a job.
Bought a spare Ottovac Li-Ion battery, and it's been a game-changer. I use my Ottovac for all sorts of lifting tasks and the last thing I need is for it to die in the middle of a project. The extra battery charges fast and lasts a good amount of time. If you’re using your Ottovac regularly, having an extra battery is a no-brainer.
I work long hours so I got an extra battery for my Grabo so I don't have to wait for it to recharge. The battery itself lasts a long time and charges pretty quickly. If you’re using your GRABO for big projects or long days, having an extra battery is definitely worth it.
I bought an extra GRABO battery for my Pro, and it's been fantastic. The original battery is great, but having a spare means I dont have to wait for it to recharge. Switching between batteries is super easy, and the extra one doesn’t take up much space in my tool bag. Highly recommend grabbing an extra if you use your GRABO a lot.
I picked up an extra battery for my nemo Grabo and it's been a lifesaver. There’s nothing worse than running out of juice in the middle of a job but now I always have a backup ready. The battery charges pretty quickly, and it lasts a good long while, even with heavy use. Definitely recommend grabbing an extra battery if you work long hours.
the Erguo has been very useful in my job lately. I had to install this huge custom cabinet in a client’s kitchen and usually lifting and positioning those heavy wooden panels would be a nightmare and require an extra set of hands. But with the Erguo I handled it all by myself! The adjustable handle made it super easy to get the right angle and save my back from straining.
I recently added the GRABO Erguo S1 to my tool collection, I work in construction so this tool eases my back a lot. Its perfect for handling large awkward materials like drywall and glass panels. The build quality is top notch and it feels sturdy. The GRABO Erguo S1 has made my job much more efficient and less physically demanding. Highly recommend it to anyone who frequently works with heavy materials or has to bend down a lot.
The GRABO Erguo S1 has been a great addition to our shop. We often handle large glass sheets, and this tool makes the process so much easier and safer. The adjustable handle is a game-changer—it lets us get a good grip and position the glass precisely without straining. The suction power is really strong and reliable, so I never worry about the glass slipping. Plus, the battery life is solid, lasting through multiple projects without needing a recharge. If you work with heavy, awkward materials, the GRABO Erguo S1 is a must-have.
I own a custom furniture shop, and it’s been a huge help. We move heavy wood panels, countertops, and even large pieces of finished furniture. The suction is incredibly strong. It makes it easy to lift and move materials without worrying about slipping or uncomfortable grip. The digital readout helps us keep track of the battery life and suction pressure so we know when it’s time to recharge or adjust the suction. Having four of these lifters means everyone on the team can use one, which speeds up our workflow and makes the whole process more efficient.
Each lifter is powerful and reliable, and having four of them means we can work on multiple projects at once. The digital pressure gauge is a great feature, and the battery life is impressive. These lifters have definitely improved our efficiency and reduced the risk of injury. Highly recommend for any business that deals with heavy materials.
Got the GRABO PRO Lifter 4 Pack for our construction crew, and it’s been so helpful. We do a lot of heavy lifting with glass and stone, and these lifters make it so much easier. Each battery lasts a long time, even with continuous use. It’s definitely made our work faster and safer. If you’ve got a team that needs to lift heavy stuff regularly, this 4-pack is a solid investment.
The GRABO PRO Lifter 20 is amazing! I do a lot of tile work and this thing has made my life so much easier. The suction is super strong, and the digital readout helps me keep track of the battery and suction levels. It's lightweight and easy to carry around, which is perfect for moving between job sites. If you're in the trades and need a reliable lifting tool, this is the one to get.
I work in stone masonary and this too is fantastic. The suction power is incredible, and it can handle big stone slabs that usually are awkward to grab. The digital pressure gauge is really useful, and the whole thing feels solid and well built. The battery lasts long enough to get through a full day of work, which is a big plus. This tool is a game changer for anyone working with heavy materials
Just got the GRABO PRO Lifter 20 for my glass installation business, and it's a beast! The suction is super strong, making it easy to handle large glass panels without any stress. The battery life is impressive, and the digital display is a nice touch. It’s definitely made my job a lot easier
Been using the Nemo GRABO for about a month at my autobody shop, and it's been a game-changer. This thing is strong enough to lift heavy steel panels and doors with no problem at all. It's portable, easy to use, and saves me a ton of effort. If you work with heavy materials, the Nemo GRABO is a must have.
This tool has made my work life so much easier. I run a small contracting business and this tool is perfect. The suction is super strong and it’s really simple to use. The battery charges fast and lasts a good while. I've had all my guys try it and its now an essential tool in our job sites.
Just got the Nemo GRABO for some DIY projects at home and it’s awesome! I used it to lay new tiles in my entire house. I thought it would be a lot more tedious and time consuming but its defintely helped me out a bunch. The battery lasts a long time, even after using it for hours. Totally worth it
So simple, these cabinet plates are genius and are real MVP on the job site.
Changed our business forever, I don’t need to send two guys to install cabinets anymore, one guy can do it easily.
Izzy did it again. Finally a smart way to hang cabinets.
Good for moving stones around, wouldn’t use it for my installs, but does the job just fine.
Use these almost everyday moving pavers, awkward hold, but it’s better than bending down all day long.
Used these for one job, then my entire team wanted one, so we had to buy more.
I gave one to each of my installers for their install jobs. Great tools to have in the truck.
Christmas came early, this four pack helps my entire team and I.
Our installers love using both the grabos alone and the grabos on the seam setter.
Made installing countertops way easier.
The seam setter worked out great, better than my old pump seamer.
The GRABO Canvas Bag is perfect for storing and transporting my tools. The double zipper closure keeps everything secure and the durable canvas material is built to last.
The GRABO 90 Degree Stone Seam Setter is a game changer! I was able to achieve perfect 90 degree angles every time on my kitchen counters. I highly recommend this tool to anyone in the business.
I was surprised by how much I liked this product. I didn't think I would use it much, but I find myself reaching for it all the time. It makes lifting heavy materials so much easier.
I've been using it all day and the battery was still full , so far so good 👍 👌 😌
One person found this helpful
Used to move 2 mirrors 7 ½ ‘x5’ each. Unbelievably secure grip! Indicator stayed at full charge during an hours move.
This is a very well made suction cup, that I was easily able to lift over 200 LBS of weight while using. This cup has multiple suction points, automatic shutoff of the pump, gauge, and strong metal frame. The pressure relief, on/off switch, are all easily located near the handle. The automatic vacuum is awesome, very quick to lock on and draw a strong suction. The unit takes four AA batteries, which I used rechargeable batteries, worked great. You can see in the photo, I was getting over .6 bar of suction. I would recommend this suction cup to anyone who needed one.
Hope this review helps you.
Has fantastic suction and is a much safer way to support and position glass items and drywall sheets. Easier on the back and fingers. Grips great. Easy to set the suction and has a comfortable grab handle. Perfect gift for the handyman in the family. Transports really well. Excellent durability. No hassle setup.
I unboxed this and attached it to the side of my safe. Pulled it around the shop. So, I got another one and attached foot holds with ropes to them. Now I’m climbing glass buildings like Spider-Man with them. You could probably pick up glass and tile with them, but I’d rather be Spider-Man, so that’s what I’m gonna do. In a world full of tile setters, be Spider-Man. Kirk out!
Used this product to help carry HVAC units while putting them in attics and loading them to and from the trailers. The unit gets to suction quickly and the electric pump feature makes it so easy for one handed operation. So far it has held on while carrying a few hundred pound unit with ease. Definitely recommend it
Works as advertised, hard to tell, but I am lifting a stove/oven combo in the pic. This thing is so cool, not just for glass, it works on metal and sheets of plywood too. Only have two small gripes, first is the controls are a little fiddlely, you hit the button to start the suction, it turns off automatically when it’s reached proper suction, the only thing you have to get use to is to turn it off before you release it, if you forget to turn it off and hit the release button it will start pumping up again, not a big deal just a small learning curve. The second gripe is it is battery powered and didn’t come with batteries. Again not a deal breaker but it would of been nice. I’m planning on ordering a second one so I have one for each hand. Awesome product.
This thing makes moving things so much easier! So many times if something just had a handle, it would be much easier. Well here it is! A handle that has super strong suction and will stick to many things and make them easier to move.ç
This is one of those tools that I would think, "that would be nice to have"--now it's "how did I go so long without buying this?" This suction gripper is a must-have for people who need to move heavy objects with smooth surfaces--not just glass or large ceramic tiles! I found it incredibly useful for moving things like file cabinets--heavy as heck but without a place to grab onto!
The gripper is quick and easy to charge, comes in a nice molded vinyl carry case that snaps securely, with clear instructions. What's not to like?
I am impressed with the engineering, and care that was put into this design. I own a construction company and I can think of several possibilities for the application of this product. I did try the cup out, and would feel very comfortable lifting heavy doors and windows. The built in gauge gives you confidence when handling delicate materials, and products.
This electric suction vacuum cup has impressive holding power. It is well made and all controls are easy to reach and use. It utilizes 4 AA batteries (not included) and comes in a robust protective case. So far I’ve tested this to carry glass and it does an excellent job. I plan on utilizing this mostly to install tile in showers but can be used in wide range of applications.
Exactly as shown in the picture. Made from really good material. Feels very sturdy and durable. Comes in handy for many DIY projects.
I am using this to lift and hold 26ga metal siding.
I am not using it to move them but to lift and hold them in place while they are screwed in.
I had a manual pump one but it only lasted a couple of weeks, I have been using this one daily for close to a month now.
I am glad I spent the extra money on this one.
5 STARS
It is not possible to overstate how much I love this item. I love everything about it. Given how long the batteries last, the choice of using AA batteries instead of a proprietary battery pack was hands down the right call. The fact that the device actively monitors the pressure while on will save money. If it didn’t and the device started to lose pressure for any reason, then you would drop your work piece and that could be both expensive and dangerous. According to the manual, this device under absolute perfect conditions has been tested at 440lbs but is only rated for 220lbs.
The thing that really makes me smile though is how compact the device is. I remember watching MythBusters as a kid. In one episode Adam Savage built a suction cup climbing rig to scale a building. It was big, heavy, complicated, and probably cost more than buying four of these. He would have killed for this product back then.
It might seem like allot of money to spend on a suction cup and if you’re not using one all the time it probably is. But if you use big suction cups like this allot then you will be happy to pay for how much pain it will save your fingers.
Pros:
1. Battery life very long
2. Easy to use
3. Works on any flat surface so it has so many other uses
4. Made by GRABO
5. Automatically reseals
Cons:
Surface has to be smooth, the professional Grabos I think allows a lot more give. Where if there are any ridge lines, it will not sanction. Though this is expected.
Overall:
Most people know the brand GRABO, so it was not sure why this device was also called OTTOVAC. Regradless it works great! I used this specifically to install 12x24 tiles and it would have been a PIT if I did not have this. Besides easily holding the tile and placing it on the thin set, it also allows you to "wiggle" the tile around to make sure you have full contact and coverage.
This thing sucks awesome! Definitely will attach and vacuum suck and seal on to flat smooth surface items like glass windows or body panels!
I have a few manual pump suction clamps but they don't compare to this one.
Pos.
Powered by commonly available AA batteries.
Easy to use.
One button control.
Suction gauge.
When the pressure falls vacuum automatically compensates.
Vacuum is automatic one powered on.
Nice hard case.
Great holding power.
Metal construction.
Negs
No repair/ maintenance parts as with others I have.
This suction cup actually works well with sheet metal, but you have to make sure that the sheet is relatively flat when you are pulling the suction on it. If the suction does break loose, the pump automatically starts back up to achieve a suction back on the sheet. I have used this to move around 5' x10' x 16 gauge stainless steel sheets by myself and the cup locks on well and stays locked on while picking the sheet up vertically on its side. It will not pick the sheet up if it is laying flat, though you can lift one end up in order the get it up off of the sheet below it or to just help you stand it up on one edge. I use rechargeable batteries in mine and put them on charge after every use so I can't say how long normal alkalines would last in this, but I really do like the auto pump on this suction cup.
I was skeptical, thinking the electric pump was gimmicky. But the cup appeared robustly constructed and Grabo's electric vac cups are successful in their industrial line, so I ordered the Ottovac, which is in a more conventional form factor.
It is truly robustly constructed. I particularly like having a steel handle frame. While there are a number of plastic parts, including much of the pump itself and the pressure release, they are non-stressed parts. Weight bearing parts are stout and the weight ratings and limits reflect that.
My need is to assist in appliance and furniture moving, often simply to get items away from walls, over obstacles like rugs and sills, and to put them on dollies. Vac cups provide handles where you need them and, when the item is vac cup appropriate, MUCH faster and easier to use than just about any other method aside from an electric or hydraulic lift.
I tested the Grabo Ottovac on wood furniture, on glass, and on appliances. The furniture items were mostly clear wood finishes - poly, lacquer, etc. - with somewhat porous surfaces. The Ottovac did lose vacuum on these, but the pump kept the vacuum in the green zone, allowing me to use the cup with no issue. I wouldn't carry something any distance this way, but for a quick lift, it's terrific and something that's often either not possible at all or dangerous with a manually-pumped vac cup. On the non-porous surfaces, the Ottovac works perfectly and holds vacuum like any good vac cup ... but is easier to use.
A couple of small things: First, I do have to give a bit of a push on the cup when starting in order to get the vacuum to grab initially. Second, the release "button" is wonderfully easy to reach and use, but is almost TOO easy. An inadvertent release on a vac cup can be very dangerous. I wouldn't mind having the release positioned down somewhat so as to make it less likely to hit it accidentally. Finally, the metal handle is smooth. It feels good but is slippery if your hands are wet or sweaty. Use gloves or tape-wrap the handle.
This is a very good product, well-made, and effective. A few tweaks and it would be perfect. As it is, it's a substantial step up in usability from the value-priced cups on the market. You pay for that, but IMO it's worth it.
This works well for picking up large, flat, smooth items. It is well made and easy to use. I just wonder if one could climb a building with several of these....
What do you get?
A battery operated vacuum suction cup with carrying case.
How does it work?
Release the battery compartment, slide out the battery holder, install four AA batteries. Slide the holder back in and you're ready to go.
Push the suction cup against a flat surface, press the green button and you'll hear the vacuum pump start. There's a suction guage that SHOULD start to move when the pump starts. IF it doesn't, the cup is not properly sealed against the surface. Once the guage reaches the green "zone" and maintains it for 3 seconds the pump will automatically turn off. If the tool begins to lose it's suction the pump will turn back on and attempt to restore the vacuum into the green zone.
Once you're done. Simply push the green button a second time to turn off power to the pump. If you hit the vacuum release collar before you do this the pump will kick on and try to restore the vacuum. Not a huge deal, just push the button. But why make the pump work any longer than it has to.
You'll notice that there are multiple filter holes in the suction cup, most of these tools only have one. I'm going to assume one goes to vacuum guage and one goes to a vacuum sensor. Just a guess. In the manual there are rudimentaty instructions on how to change the white vacuum filter. Basically "remove fitler with the tip of a screw driver. Then push the replacement filter into the bottom plate and secure it" One of those "it sounds simple enough until you have to do it" instructions
It somes with a nice cushioned carrying case to ptotect it. But doesn;t come with batteries. I took batteries that worked in my TV remotes, but they must have been close to depleted because the pump sounded like it was laboring. Put four fresh batteries in and it worked like a champ. So if you use this a lot you might want to invest in some rechargeable batteries.. The manual also suggests you remove the batteries when not in use.
It'll grip glass, drywall, tile etc ANYTHING WITH A SMOOTH surface. You might dream about going all Mission Impossible with these and start climbing buidings. Obviously I'm not the first one to think that, since there's a very specific warning in the manual about NOT doing so. (I still think it would be cool) Under IDEAL LAB CONDITIONS it's rated at 440lbs. Under WORKING CONDITIONS it's rated at half that or 220lbs. So I hope you're not too heavy.
The benefit of this tool over others. NO pumping, there a guage to let you know the vacuum is holding and it automatically restores the vacuum should it begin to fail.
The ultimate question: Is it a good value at $150? If you just need it occasionally perhaps a PAIR of another brand for $60 will work for you. If you need this for your livelihood, it might be worth it. I'll leave that up to you to decide.
I purchased this to help me lift and carry computer rack enclosure walls. Each weigh about 68 pounds and measure 40" W x 75" H x .5" thick. I had two concerns when purchasing this. Would GRABO warp the wall? Would it hold without slipping? GRABO did not warp the wall and held on tight without slippage. I can trust this unit for my work. I like that it will automatically trigger the vacuum pump when the suction decreases. It happened while carrying a wall. It did not slip before or during the pumping. I plan on using this for glass chair mats, as well.
What a great invention for lifting things. Advancing arthritis makes me appreciate any tool that makes lifting things easier. Get one or two of these if you "need a lift" in your day.
Seriously. If you're doing flagstone and you don't have this tool, you don't know what you're missing. Really shines after you puzzle-in all your rocks and have to lift each one out to level individually. No easier way. Grab the handle and lift it out without disturbing anything around it including existing sand base. Set it back in with stability and precision. Way better tool than I though it would be. Worth every penny.
This is a very good product. But it only works on larger pavers and it works excellent on travertine. I wish it was a little smaller so it could get the regular size pavers too. Overall very satisfied.
Let me start by saying, if you can see this being useful, stop right here and just order it! I chose the older analog display model , well cuz I’m cheap… and this works just as well only cheaper!! Hands down best investment ever. So useful , picks up heavy natural slate material no problem , even the ones with natural uneven surfaces, unless it’s way uneven, but for the most part I’m completely blown away with how absolutely useful this thing is !!!
Use for picking up granite... I hung on the wall from it.. I'm 185 easy detach which I like...
I was able to try one of these out from a coworker last Friday. What a device! An elegant and convenient tool. I look forward to ordering my own. It is a great improvement from my home brew vacuum fixture. With some selective attachments I see great potential in not just lifting and holding panels, but also for holding fixtures as I drill or do router template work. This will be like a mag drill for non-magnetic materials. I have always liked the venturi vacuum generators for the shop and the woods grip for everyrhing else. This truly is the best of both. As long as the batteries charge faster than they are depleted in the tool I will be set.
Undeniably the best suction cup system out there in the market. I’m a contractor and we lift heavy things all the time and with this being able to suction to a wide variety of surfaces makes it the best tool on the field.
Worked like advertised. No better recommendation than that. Was laying 2x2 concrete pavers apx 200 lbs per. Laid them at 4-5 rate of speed from doing by hand. Hooked carry chains where straps went to make much easier. Worth every penny
This is the real deal! It can lift, hold & place uneven surfaced slate tiles, I’m impressed!! You’ll blow out your back before this baby fails. And what’s included: 1 unit, 2 batteries (so 1 can recharge), 2 gaskets, 1 110v charger, 1 hardcase.
OMG!!! Thank You!
From lifting sheets of glass shower panes to lifting 2’ x 4’ large format tiles.
From awkward to simple!
Thank You!!!!
While researching bluestone patio construction, mentioned was made of the Grabo. Naturally I had to have a closer look. It is an impressive design, well thought out, even down to the carrying case. It works extremely well. If you have a need for this kind of functionality, it is a superb tool.
I work mostly alone, this is an investment. Not a neat toy. The Grabbo saves your hands, your wrists, your arms. they make working faster and safer. 3/4 in OSB to metal frames of washers and dryers. This is going to be one of the greatest products of decade.
I have a bluestone patio set in stone dust that time to time needs to be reset due to settling. It is a snap to pick up a piece of bluestone with one of these. They never failed. I ordered a second one because I have a few very large bluestones that make it too hard to lift with just one.
Worth every cent. I have two year old Travertine Pavers that had some normal settling. I tried several things to lift them, but to no avail. This tool allows surgical removal of single tiles and easy, precise drop in as you put them back, all without damage to original pavers.
This thing is great for handling sheet goods though, unsurprisingly, doesn't work with porous material like MDF. It works great on wallboard and plywood but anything that air can go *though* can't be lifted.
This model runs constantly so even with the most non-porous material, like glass, the pump continues to run. The pump on the "Pro" version only runs when the vacuum is low. Which to buy is up to the user. Both are good.
This product works as advertised. I used it on a 24"x48" porcelain tile floor job. It never lost suction and was a great asset for installing these large tiles while working alone. The unit was advertised as having 2 batteries and only came with one. The vendor was very prompt and proactive in getting an extra battery to me. Great product and fantastic customer service, I highly recommend both!
Bought the Grabo about a year ago after seeing it on a couple different Youtube channels. Worked exactly as described and perfectly for moving large flat stuff easily. Drywall, wood doors, sheet metal, plastic, FRP panels, Plywood, etc. etc. etc..
One day recently it stopped working. Opened it up looking for loose connections or bent battery terminals, no such luck. Went to their website and filled out the contact form for information on repair/warranty. Couple days later got an email from Fedex saying I had a shipment coming and another email from their customer service that they were shipping me a replacement for free. Should have it in a few days. Not many places have that level of support anymore. I won't hesitate to recommend Grabo's to all the tradesmen and women I know. I'll be buying another as well for my workshop once it is completed.
I used it to set tile. Works great especially if you have to remove a tile you just set
My son was ecstatic to open this gift on Christmas. It will help him so much with installing drywall on a project he has going in his garage.
Awesome
Makes laying pavers much easier. I tried it on bluestone, concrete pavers and plywood. Doesn't work on cinder block.
Awesome tool.
I’ve already put it to work, hard, laying bluestone. Amazing tool!!! A complete game-changer for setting un-even stone.
Powerful
This little machine is very powerful. Great for carrying large sheet goods or tiles.
Using this on the job site to move granite slabs for install of kitchen. Project manager showed up and was super impressed. This item can save a lot of broken toes
The media could not be loaded. This gadgets does what the cheap $10 suction cups from the local hardware store cannot do. It lifts pavers that are not perfectly smooth. I am not sure if it lifts the kind of pavers that look like giant vitamin tablets (with lots of little holes/cracks). It does lift my 18 inch pavers from Home Depot that weight about 40 pounds each. The paver tiles are not perfectly smooth like marble. They have a texture, but they are not the large pores like on the cheaper pavers that are commonly sold in the hardware stores. Thank goodness I did not have to buy a suction gadget that requires an air compressor. This helps a lot because when I was dropping the paver tiles by hand they would disturb the flattened sand bed. Even if I dropped the paver just about 1 inch from the ground, the sand would be disturbed, and I would have pavers that were a little uneven. I would have to pull them up and fix the sand. With this gadget, I will not have to do that. I can lay the paver tiles with very good control and not disturb the level sand. I LOVE this thing.
Really impressed. seen them else where but cant be beaten on quality and price!
Needed for a site project, was highly recommeded.
Did the job just great
Really good, great lifter. Works well easy to move around. Would Highly recommend to anyone
Bought as a one off purchase after seeing the reviews, Good price works well and was actually impressed at the quality
Good item. Needed to lift some bathroom tiles. Did the job. Happy with the product.
Having needed something as an all rounder lifter rather than material specific this worked great. Really good item lifts well. Not worried that lifter will just drop feels really secure.
Impressed with this lifter. Really works well. Easy to work and pleasantly surprised with how well it does.
Fantastic service by dortech friendly and helpful, just ordered second grabo.
The build of this product feels really good. It's made of glass fiber reinforced PA6 nylon like high quality power tools. Saves time and makes it easier to lift counter tops and large tiles. It's great to not have to worry about how dusty the surface is.. this think grabs on to anything
Wow what a tool. Used it to pull tiles off of a wall after cutting the grout joints.
Lifted sand stone no problem.
Wow. Simce my good mate told me about this I bought two for recent 60m2 porecelain patio job what a life saver. Must have
I tried to show others how great this machine was on brand new flakeboard and plywood, Not So Much; Tried several times and Nope! I tied several areas and gave them plenty of time to draw vacuum...
Amazing tool. I see the activation button is redesigned. In my experience, it started to malfunction around the 6 month mark. If died with the vacuum motor shortly after. It was used in pretty demanding conditions and its last day had some exposure to rain involved.
Incredible suction. I use it to lift bluestone on my patio to fix sinking sections.
I’ve already put it to work, hard, laying bluestone. Amazing tool!!! A complete game-changer for setting un-even stone.
Using this on the job site to move granite slabs for install of kitchen. Project manager showed up and was super impressed. This item can save a lot of broken toes
This little machine is very powerful. Great for carrying large sheet goods or tiles.
This gadgets does what the cheap $10 suction cups from the local hardware store cannot do. It lifts pavers that are not perfectly smooth. I am not sure if it lifts the kind of pavers that look like giant vitamin tablets (with lots of little holes/cracks). It does lift my 18 inch pavers from Home Depot that weight about 40 pounds each. The paver tiles are not perfectly smooth like marble. They have a texture, but they are not the large pores like on the cheaper pavers that are commonly sold in the hardware stores. Thank goodness I did not have to buy a suction gadget that requires an air compressor. This helps a lot because when I was dropping the paver tiles by hand they would disturb the flattened sand bed. Even if I dropped the paver just about 1 inch from the ground, the sand would be disturbed, and I would have pavers that were a little uneven. I would have to pull them up and fix the sand. With this gadget, I will not have to do that. I can lay the paver tiles with very good control and not disturb the level sand. I LOVE this thing.
I am a Union Carpenter and used the Electric Vacuum Suction Cup Lifter (the product) for moving and installing wood wall panels, metal service chase covers, sink knee panels, metal & wood cabinets, counter tops and solids sinks. The product was an instant second hand/handle for moving and installing. It reduced time and effort to get the job done and was more secure than the manual suction cups we have used in the past.
It would be an added feature of the product to have a vacuum gauge. Such a gauge would let me know when the product was losing suction. I could turn it back on before I lose the hold and potentially damage finished product. I did not purchase the case but would recommend that to anyone that purchases. A case would insure longevity and performance of the tool. If possible, it should be included in the purchase price.
Overall a superior product on the market. I feel this product is a huge asset to my trade. I am looking forward to finding more uses and advantages of the product.
Order came quick. Packing was great. The product so far so good. Using it for tile and random stuff, I don't know how it can keep suction but it does. Some surface won't hold suction but it takes awhile to lose suction. If kept on, it will hold suction.
Amazing tool! Super fun to use makes jobs more enjoyable. Would recommend to most trades. I think this product will be a huge benefit to those who have to lift awkward materials.
We have used the grabo for numerous types of material wood, tile, laminate it works fantastic better than I anticipated
I'm a licensed glass contractor in Los Angeles and I'm so happy I found this product. Can lift virtually anything with it and the quality of the product is very nice. Doesn't feel light and cheap. Highly recommend this product for many different trades.
This thing is awesome. Makes holding onto sharp and delicate edges so much easier. Sometimes things are just hard to find a place grab. Now i can just stick the grabo to it and hold on.
it worked fine. have not got to use it much. hoping to use it more in the coming months
We laminate textured fused glass and have always needed a suction cup to grab the undulated surfaces. This product is the answer for these situations. Now we can grab rough surfaces with ease. This is a great tool to have around the shop. We will be buying more.
This is a truly fantastic product. I haven't yet put it to a real test but I have been grabbing onto all sorts of surfaces and the grip is just amazing.
The Nemo Grabo is fantastic. You would not believe the power and ease of use. It adheres to almost any surface within seconds and enables you to powerfully lift and move almost anything. It can perform all sorts of task and it's even fun to use!
I have had this for several months and find it very useful. It works on a variety of materials and maks handling heavy object much easier. Would definitely recommend.
We received our Grabo yesterday and all our carpenters are very exited, we have only used it a few times to lift big picture windows and it works amazing. I can see us purchasing more it will save a lot of sore backs and speed up loading and unloading.
I have been in the glass business for 3 generations and I will use this for many things! It makes lifting glass and metal a no worry option in it letting go! Very useful and time saving. Great for fabrication of glass panels.
This thing is awesome. Received it the next day after I ordered it. Used it the minute I got it to just try it & it worked on glass & drywall . Took it to work the next day & used it on OSB plywood, Zip system plywood & framing lumber & had no problem with any of them . Can’t wait to use this awesome tool on more , love this tool .
Works as described . Strong don't test on dry wall if you are over a screw patch it will pull the patch off the wall. Bad idea to test on living room wall. Haven't been able to get then to slide off load very safe to use.
We ordered this for the stone countertop industry, for production and installation.. we used it for the first time yesterday, and holy wow, we will he ordering 6-8 more! Unbelievable grip, took and install down from usual 45 min, to close to 20...! Fantastic product! Looking forward to more!
Product performs as advertised, we have not found a material that the Grabo has had issues with. you can tell quality materials are used in this product, we will using this the Grabo moving forward on all projects.
This tool worked great, better than expected! On smooth to semi-smooth surfaces it has long-lasting holding power even after the pump is turned off. We used it on an acid-etched concrete panel and it carried the 120-lb panel with ease with the pump running continuously (which should be expected on this type of surface). They're fairly light weight and ergonomic, which beats the heck out of air cups with hoses and compressors attached.
The suction power of this thing is unbelievable...I tried all the round suction cups with the little thumb pumps...could not pick up my concrete pavers, not even close...I have very rough concrete pavers, they weigh 100lbs each and it has no problem, they are 24”x24”X2” thick solid concrete...even the ones with lots of air pocket holes in the tops it locks on and don’t let go, I will literally stick to anything remotely flat...I even hung from a sheet of plywood...no joke.
Ordered this last week after doing a glass install job. Did a bunch or research on different options. This seemed like the most advanced option. I of course was a little sceptical that it would work as good as it was shown. I opened it up and went into an apartment I'm renoing currently. Stuck it to the side of the fridge and was easily able to lift one side with no issues. I have shown it to a fellow tradesman who is thinking of purchasing a set or two for his quartz business he was so impressed with a couple minutes of operation time. I even tried to pick up our one home-made air scrubber. It weighs around 85lbs. The top is rough plywood and was covered in dust. After the machine sucked itself down it was no problem to pick up. After a quick blowdown we managed to pick it up without the motor on.(this being despite the manufacturer instructions to keep motor going on porous materials) just to see if it could live upto the hype. Very impressed and will recommend to anyone I can.
Had borrowed one from a friend last winter and it worked well. I bought my own for a specific project I was doing. This tool works excellent. I laid a 175 sq.ft. stone floor (about 50 - 24""x24""x1 1/4"" stones and cuts) The stones weigh about 50 lbs and have a rough thermal finish. The Grabo lifted with no problem. I was showing it to a carpenter and even on a plywood wall I could not pull it off . Highly recommend this tool.
Also only used half the battery life over the two days of setting stone.
"my nemo grabo came today, Inhave been very excited to try this tool out I work as a union carpenter so there are many different applications of work I could use this for, from drywall, lumber even exterior building panels. I also have a side handyman business where I take just about any type of work and the Nemo os gonna be right there with my helping move furniture and appliances to tile and door glass panes. The tool came securly tucked into cutout styro foam with a battery charger, 2 batteries, a replacement air filter and base foam sealing pad. Bith batteries were only partially charged so I gave each one about an hour in the charger as the company suggest, there is a red and green light in the charger base letting you know when you ready to go.
Once all charged up It was about 8pm and I didn't feel like running into the cold outside to try out the Nemo Grabo. So I improvised and stuck the Grabo on my kitchen wall with is textured hit the button to vaccum which is extremely quick and then grabbed with both hands and lifted my legs of the ground. The Grabo did not move at all even with all 230lbs of me hanging off it. This was a great first impression of the tool in use. It could not be any easier to use vaccum button release air button and a power on and off. As of this review Im going to suggest you buy this, even my wife was impressed and and asked if she could use it when needed. I highly recommend the tool.
Use for picking up granite... I hung on the wall from it.. I'm 185 easy detach which I like...
I was able to try one of these out from a coworker last Friday. What a device! An elegant and convenient tool. I look forward to ordering my own. It is a great improvement from my home brew vacuum fixture. With some selective attachments I see great potential in not just lifting and holding panels, but also for holding fixtures as I drill or do router template work. This will be like a mag drill for non-magnetic materials. I have always liked the venturi vacuum generators for the shop and the woods grip for everyrhing else. This truly is the best of both. As long as the batteries charge faster than they are depleted in the tool I will be set.
OMG!!! Thank You!
From lifting sheets of glass shower panes to lifting 2’ x 4’ large format tiles.
From awkward to simple!
Thank You!!!!
I'm revising my previous review and apologize for the 1 star rating. I initially had a difficult time getting it to work properly and was frustrated with it when I wrote the review. I got it to work and I'm pleased! It's a well made tool and I'm glad I made the purchase. Although, I wish it were a bit lighter and it wasn't necessary to remove the battery to charge. Perhaps that's a waterproofing issue. Minor though.
What a great invention for lifting things. Advancing arthritis makes me appreciate any tool that makes lifting things easier. Get one or two of these if you "need a lift" in your day.
The only things I've been unable to grip with mine are objects in which either:
A. ...the surface is SO covered with particulate matter (e.g. covered in sand, dust, powder/flour, etc.) that the device is unable to form a seal, or...
B. ...something whose surface is not only irregular, but is also too porous to draw a vacuum against (roll of carpet, pile of pumice stone, a screen door, etc.), or...
C. ...something whose surface isn't capable of supporting itself under any circumstances anyway (a pool of water, a pile of gravel, etc.)
...and you know what? That's all TOTALLY FAIR.
One doesn't pick up one of mankind's most effective electromagnets and then grouse about it ""not working on non-metallic items"", or one of the world's most-powerful acids, only to whine about it being ""unable to dissolve glass,"" either (or, at least, not without getting promptly lumped into the category of ""humans I hate on principle"").
I CAN lift plywood, drywall/sheetrock/gypsum board/hardiback, tile, granite, marble, glass, metal of any sort, appliances, floor tools, cabinets, furniture... and gods only know what else I've yet to discover and/or simply haven't thought to experiment with yet! Yanno the old saw about ""it's not heavy, it's just awkward!""? It's genuinely shocking how true that actually is. We were able to move a California King mattress wrapped in plastic with NO problems. It was EASY with something to actually get a positive grip on.
Hell: I was able to stick ONE of them to a finished ceiling, HANG PULLEYS from its integrated mounting brackets, and use IT, in turn, to HOIST A 90lb dust collector EIGHT FEET UP A WALL, then REST IT ATOP A SECOND ONE stuck to a bloody FINISHED INTERIOR WALL, tie off the rope, and leave it there - supported only by their respective suctions - until I had time to climb a ladder and lag bolt it in - OVERHEAD, AND BY MYSELF.
Izzy Swan - genius inventor and all-around roaring badass - has done some really, REALLY cool brainstorming videos surrounding the use of them, too (I'm not affiliated in any way, just trés impressed):
youtu.be/dNxj8_S4inQ
youtu.be/sYwtIWYpPvQ?t=12
So has Andrew Klein (equally-genius, equally-badass-of-the-roaring-variety):
youtu.be/V4P-MRnRROE
Yes: they're expensive. But, I assure you: you'll be stunned how many applications around the shop you're likely to find.
One person found this helpful
The Grabo is a work-enabler. It lets you lift heavy things and will help hold large or heavy or awkward objects
I have been using it to lift plywood panels, which at age 72 is not easy for me. The GRABO is a tremendous help. I was working with a sheet of 3/8 Doug/fir AC plywood, and it grabbed onto the A side, pulled the vacuum and would then shut off, restarting in about 45 seconds, when it had lost a certain amount of vacuum. After cutting the plywood down to 43x76, I grabbed the C side to carry it out and place it on rafters. The GRABO grabbed on fine but ran continuously. It never slipped. I also intend this for use with a small vacuum bag, and a Festool type board holder for sanding and routing.
Worked like advertised. No better recommendation than that. Was laying 2x2 concrete pavers apx 200 lbs per. Laid them at 4-5 rate of speed from doing by hand. Hooked carry chains where straps went to make much easier. Worth every penny
I work mostly alone, this is an investment. Not a neat toy. The Grabbo saves your hands, your wrists, your arms. they make working faster and safer. 3/4 in OSB to metal frames of washers and dryers. This is going to be one of the greatest products of decade.
I have a bluestone patio set in stone dust that time to time needs to be reset due to settling. It is a snap to pick up a piece of bluestone with one of these. They never failed. I ordered a second one because I have a few very large bluestones that make it too hard to lift with just one.
While researching bluestone patio construction, mentioned was made of the Grabo. Naturally I had to have a closer look. It is an impressive design, well thought out, even down to the carrying case. It works extremely well. If you have a need for this kind of functionality, it is a superb tool.
This charger has made my travels so much easier. I highly recommend it to anyone who uses the GRABO battery.
I use this charger for work and it's been great. I love the versatility of being able to use it in different countries.
This charger has been a lifesaver on my international trips. It's so compact and easy to use. I love it!
I love the compact design and the fact that I can use it in multiple countries. The GRABO battery is a game-changer, and this charger just adds to its versatility.
This is a must-have for anyone who frequently travels. The interchangeable adapters make it so easy to charge my GRABO battery no matter where I am.
I've been using this charger for several months and it works great. No more searching for compatible chargers while traveling.
I highly recommend this charger to anyone with the GRABO battery. It's so convenient to be able to use it internationally.
I love that I can use this charger in multiple countries. The GRABO battery lasts a long time, and this charger makes it easy to keep it powered.
The compact design makes it easy to bring on the go. The interchangeable adapters have come in handy on my trips abroad.
I travel internationally for work and this charger has been a lifesaver. No more worrying about finding compatible chargers. Highly recommend!
A Must-Have Accessory!
Efficient and Durable!
Highly Recommend!
Perfect for On-The-Go!
Love the Sleek Design!
Compact and Fast Charging!
Great Charger!
I'm a DIY enthusiast and this canvas bag is perfect for carrying all my tools. The double zipper design makes it easy to access everything I need and the durable canvas material is built to last.
I'm a professional contractor and this canvas bag is perfect for carrying my tools. The double zipper closure keeps everything secure and the durable canvas material can withstand heavy use.
The GRABO Canvas Bag is an excellent storage and transportation solution for my tools. The durable canvas fabric and double zipper design ensure that my tools stay protected and organized.
I'm so happy with my purchase of the GRABO Canvas Bag. It's the perfect size for all of my tools and the double zipper closure keeps them secure and protected.
This bag is perfect for contractors and DIY enthusiasts alike. The durable canvas fabric and double zipper closure make it the best tool bag on the market.
I'm very impressed with the quality of this canvas bag. It's the perfect solution for my GRABO tools and I love the double zipper design.
I highly recommend the GRABO Canvas Bag. It's the perfect size for all my tools and the double zippers make it easy to access everything I need.
This canvas bag is a must-have for anyone who wants to keep their tools organized and protected. The double zipper design is great and the tough canvas material is built to withstand heavy use.
The best investment for carrying large stone sheets. So glad I got it!
Excellent product. So glad I found it for my stone fabrication business.
GRABO Vacuum Lifter has made my life so much easier. Would definitely recommend.
This product has exceeded my expectations. No more back pain from carrying heavy sheets!
Sturdy and reliable. Perfect for my countertop installation business.
Saved so much time and effort with the GRABO Vacuum Lifter. Highly recommend!
Loved it! Makes carrying heavy stone sheets a breeze.
I highly recommend this seam setter for anyone working with stone countertops. It's durable, produces great results, and has made my job so much easier.
The GRABO 90 Degree Stone Seam Setter is an essential tool for any stone countertop project. It's so easy to use and the results are always perfect. I'm glad I purchased this product.
I'm impressed with the precision of the GRABO 90 Degree Stone Seam Setter. My countertops look flawless thanks to this tool. I would highly recommend it to anyone working with stone countertops.
This seam setter has made my granite installation process so much smoother. It's easy to use and I'm extremely happy with the precision of the tool.
The GRABO 90 Degree Stone Seam Setter is a must-have for any stone countertop installation. It made my work look professional and I'm extremely satisfied with the results.
This seam setter made installing my granite countertops so much easier! The quality is excellent and it is built to last. I couldn't be happier with my purchase.
I recently started using the GRABO Brace Seal and I'm impressed with its performance. It's easy to attach and holds everything securely. I highly recommend this product to anyone in need.
If you're looking for a reliable and easy-to-use solution for holding delicate surfaces, look no further than the GRABO Brace Seal. I've been using it for months now and I couldn't be happier. Great product!
I've used a lot of different products for holding delicate surfaces in place, but the GRABO Brace Seal is by far the best. It's simple to use and holds everything perfectly. 5 stars!
I was hesitant to try the GRABO Brace Seal, but I'm so glad I did. It's made my work so much easier and more efficient. Highly recommend!
This product is a must-have for anyone working with thin or fragile materials. The vacuum it creates is strong and holds everything securely in place. Great product!
I never thought a small accessory like this could make such a big difference, but the GRABO Brace Seal has been a game changer for me. 5 stars!
I love my GRABO Brace Seal! It's made working with delicate surfaces so much easier. Highly recommend.
I highly recommend the Slenderseal. It's perfect for any job site or home renovation project. The construction is durable and the design is innovative.
This is an amazing product. It works great for lifting pipes and other narrow surfaces. The design is innovative and it's so easy to use.
I was hesitant to buy this product but I'm so glad I did. It's a lifesaver for my home renovation projects. I no longer have to struggle with lifting heavy tiles or pavers.
I'm a professional contractor and I highly recommend the Slenderseal. It has made my job so much easier and efficient. The construction is top-notch and it's easy to use.
I love this product! As a DIY enthusiast, I was skeptical about spending the money, but it was worth it. The Slenderseal makes lifting and moving heavy materials so much easier.
I am beyond impressed with the durability and efficiency of the Erguo S1. A great investment for anyone with a GRABO.
The Erguo S1 is so simple to install and has made such a huge difference in my lifting capabilities.
This extension is a must-have for anyone looking to make their lifting tasks more ergonomic and comfortable.
No more straining my back and shoulders thanks to the Erguo S1. Love it!
I highly recommend this extension for anyone using a GRABO lifting system. It has made my life so much easier!
The S1 has been a fantastic addition to my GRABO. So much easier and comfortable to lift heavy items now.
The Erguo S1 is a game changer! My back and shoulders no longer ache after lifting heavy items. Easy to install and very durable.
I am so glad I discovered the GRABO Pro (4 Pack). It has made moving heavy items so much easier and more convenient. The build quality is top-notch, and the value for money is unbeatable. I highly recommend this product to anyone in need.
The GRABO Pro (4 Pack) is a top-notch product that exceeded my expectations. It is easy to use, durable, and able to lift even the heaviest items with ease. I highly recommend it to anyone looking for a high-quality lifting solution.
I am blown away by the GRABO Pro (4 Pack). It makes lifting and moving heavy objects so much easier. I highly recommend this product to anyone looking for a reliable and efficient solution.
I am beyond impressed with the GRABO Pro (4 Pack). It is a must-have for anyone looking for an easy and convenient way to lift and move heavy items. I highly recommend this product without hesitation.
The GRABO Pro (4 Pack) is a game changer! I have never been able to lift and move such heavy objects with such ease. I am extremely impressed with this product and highly recommend it.
I am extremely satisfied with the GRABO Pro (4 Pack). It is the perfect solution for lifting and moving heavy objects with ease. I highly recommend it to anyone in need.
This pack of GRABO Pros is a lifesaver! It makes moving heavy items so much easier. I am thoroughly impressed with the quality and performance of this product.
The GRABO Pro (4 Pack) is a fantastic product. It's strong, versatile, and a great value for the price. I highly recommend it!
This foam seal has made a huge difference in the suction power of my GRABO vacuum. Highly recommended!
The GRABO Foam Seal is a must-have for any GRABO vacuum owner. Easy to install and great results.
I highly recommend the GRABO Foam Seal to anyone looking to upgrade their vacuum. It is well worth the investment.
I was skeptical at first, but the high friction rubber truly makes a difference. My GRABO now works better than ever.
The patented design of this foam seal is genius. It is durable and provides a tight seal every time.
This foam seal has improved the performance of my GRABO vacuum significantly. No more leaks!
The GRABO Foam Seal is a game changer! Easy to install and fits perfectly on all GRABO models.
A. Dioguardi –
What do you get?
A battery operated vacuum suction cup with carrying case.
How does it work?
Release the battery compartment, slide out the battery holder, install four AA batteries. Slide the holder back in and you're ready to go.
Push the suction cup against a flat surface, press the green button and you'll hear the vacuum pump start. There's a suction guage that SHOULD start to move when the pump starts. IF it doesn't, the cup is not properly sealed against the surface. Once the guage reaches the green "zone" and maintains it for 3 seconds the pump will automatically turn off. If the tool begins to lose it's suction the pump will turn back on and attempt to restore the vacuum into the green zone.
Once you're done. Simply push the green button a second time to turn off power to the pump. If you hit the vacuum release collar before you do this the pump will kick on and try to restore the vacuum. Not a huge deal, just push the button. But why make the pump work any longer than it has to.
You'll notice that there are multiple filter holes in the suction cup, most of these tools only have one. I'm going to assume one goes to vacuum guage and one goes to a vacuum sensor. Just a guess. In the manual there are rudimentaty instructions on how to change the white vacuum filter. Basically "remove fitler with the tip of a screw driver. Then push the replacement filter into the bottom plate and secure it" One of those "it sounds simple enough until you have to do it" instructions
It somes with a nice cushioned carrying case to ptotect it. But doesn;t come with batteries. I took batteries that worked in my TV remotes, but they must have been close to depleted because the pump sounded like it was laboring. Put four fresh batteries in and it worked like a champ. So if you use this a lot you might want to invest in some rechargeable batteries.. The manual also suggests you remove the batteries when not in use.
It'll grip glass, drywall, tile etc ANYTHING WITH A SMOOTH surface. You might dream about going all Mission Impossible with these and start climbing buidings. Obviously I'm not the first one to think that, since there's a very specific warning in the manual about NOT doing so. (I still think it would be cool) Under IDEAL LAB CONDITIONS it's rated at 440lbs. Under WORKING CONDITIONS it's rated at half that or 220lbs. So I hope you're not too heavy.
The benefit of this tool over others. NO pumping, there a guage to let you know the vacuum is holding and it automatically restores the vacuum should it begin to fail.
The ultimate question: Is it a good value at $150? If you just need it occasionally perhaps a PAIR of another brand for $60 will work for you. If you need this for your livelihood, it might be worth it. I'll leave that up to you to decide.
Review source: Amazon
Steven R. Dean –
I work mostly alone, this is an investment. Not a neat toy. The Grabbo saves your hands, your wrists, your arms. they make working faster and safer. 3/4 in OSB to metal frames of washers and dryers. This is going to be one of the greatest products of decade.
Review source: Amazon
darrell parks –
We have used the grabo for numerous types of material wood, tile, laminate it works fantastic better than I anticipated
Review source: Amazon
miguel jimenez –
A súper tool !! It’s a most have !!!<
Review source: Amazon