+1 (844) 430-0510
USD0.00

My Account

WHAT DO OTHERS THINK OF GRABO

It's important for us to provide you with honest verified reviews from real professionals. Click the review to see it's source and read more verified testimonials from Amazon, FB professional groups and more sources.  

  1. Jake Davis

    These things maade installing my kitchen cabinets so much easier. The plates are super sturdy and easy to use. Highly recommend if you’re into DIY or professional installs

  2. New England Yankee

    I was skeptical, thinking the electric pump was gimmicky. But the cup appeared robustly constructed and Grabo's electric vac cups are successful in their industrial line, so I ordered the Ottovac, which is in a more conventional form factor.

    It is truly robustly constructed. I particularly like having a steel handle frame. While there are a number of plastic parts, including much of the pump itself and the pressure release, they are non-stressed parts. Weight bearing parts are stout and the weight ratings and limits reflect that.

    My need is to assist in appliance and furniture moving, often simply to get items away from walls, over obstacles like rugs and sills, and to put them on dollies. Vac cups provide handles where you need them and, when the item is vac cup appropriate, MUCH faster and easier to use than just about any other method aside from an electric or hydraulic lift.

    I tested the Grabo Ottovac on wood furniture, on glass, and on appliances. The furniture items were mostly clear wood finishes - poly, lacquer, etc. - with somewhat porous surfaces. The Ottovac did lose vacuum on these, but the pump kept the vacuum in the green zone, allowing me to use the cup with no issue. I wouldn't carry something any distance this way, but for a quick lift, it's terrific and something that's often either not possible at all or dangerous with a manually-pumped vac cup. On the non-porous surfaces, the Ottovac works perfectly and holds vacuum like any good vac cup ... but is easier to use.

    A couple of small things: First, I do have to give a bit of a push on the cup when starting in order to get the vacuum to grab initially. Second, the release "button" is wonderfully easy to reach and use, but is almost TOO easy. An inadvertent release on a vac cup can be very dangerous. I wouldn't mind having the release positioned down somewhat so as to make it less likely to hit it accidentally. Finally, the metal handle is smooth. It feels good but is slippery if your hands are wet or sweaty. Use gloves or tape-wrap the handle.

    This is a very good product, well-made, and effective. A few tweaks and it would be perfect. As it is, it's a substantial step up in usability from the value-priced cups on the market. You pay for that, but IMO it's worth it.

    Review source: Amazon

  3. A. Dioguardi

    What do you get?
    A battery operated vacuum suction cup with carrying case.

    How does it work?
    Release the battery compartment, slide out the battery holder, install four AA batteries. Slide the holder back in and you're ready to go.
    Push the suction cup against a flat surface, press the green button and you'll hear the vacuum pump start. There's a suction guage that SHOULD start to move when the pump starts. IF it doesn't, the cup is not properly sealed against the surface. Once the guage reaches the green "zone" and maintains it for 3 seconds the pump will automatically turn off. If the tool begins to lose it's suction the pump will turn back on and attempt to restore the vacuum into the green zone.
    Once you're done. Simply push the green button a second time to turn off power to the pump. If you hit the vacuum release collar before you do this the pump will kick on and try to restore the vacuum. Not a huge deal, just push the button. But why make the pump work any longer than it has to.
    You'll notice that there are multiple filter holes in the suction cup, most of these tools only have one. I'm going to assume one goes to vacuum guage and one goes to a vacuum sensor. Just a guess. In the manual there are rudimentaty instructions on how to change the white vacuum filter. Basically "remove fitler with the tip of a screw driver. Then push the replacement filter into the bottom plate and secure it" One of those "it sounds simple enough until you have to do it" instructions
    It somes with a nice cushioned carrying case to ptotect it. But doesn;t come with batteries. I took batteries that worked in my TV remotes, but they must have been close to depleted because the pump sounded like it was laboring. Put four fresh batteries in and it worked like a champ. So if you use this a lot you might want to invest in some rechargeable batteries.. The manual also suggests you remove the batteries when not in use.
    It'll grip glass, drywall, tile etc ANYTHING WITH A SMOOTH surface. You might dream about going all Mission Impossible with these and start climbing buidings. Obviously I'm not the first one to think that, since there's a very specific warning in the manual about NOT doing so. (I still think it would be cool) Under IDEAL LAB CONDITIONS it's rated at 440lbs. Under WORKING CONDITIONS it's rated at half that or 220lbs. So I hope you're not too heavy.
    The benefit of this tool over others. NO pumping, there a guage to let you know the vacuum is holding and it automatically restores the vacuum should it begin to fail.
    The ultimate question: Is it a good value at $150? If you just need it occasionally perhaps a PAIR of another brand for $60 will work for you. If you need this for your livelihood, it might be worth it. I'll leave that up to you to decide.

    Review source: Amazon

  4. Karol B

    I highly recommend the GRABO Foam Seal to anyone looking to upgrade their vacuum. It is well worth the investment.

View All Reviews

BUY FROM LOCAL DEALERS:

menu-circlecross-circle